Aluminium spigot rings

Aluminium Centre Rings: 100% Vibration-Free Driving

Do you experience vibrations in the steering wheel or seat at speeds between 100 and 130 km/h? High-quality aluminium centre rings eliminate the fitment gap between your car hub and aftermarket alloy wheels. Extremely heat-resistant, shrink-free and durable.

Wheels N Customs Aluminium Centre Rings Logo

Why Aluminium Centre Rings Are Essential:
Aftermarket wheels (such as Japan Racing, Concaver, Rotiform, Borbet, BBS and MSW) are manufactured with a generous universal centre bore (Center Bore / CB) to fit multiple car makes. To centre the wheel exactly on the middle of your hub, a centre ring is required. Whereas plastic rings can deform, melt or break at high brake temperatures, aluminium centre rings guarantee a dimensionally stable, heat-resistant and lifelong perfect fit without play!

1. Comparison: Aluminium vs. Plastic Centre Rings

Unsure whether to choose plastic or aluminium centre rings? See the key technical differences:

Property / Feature Aluminium Centre Rings Plastic Rings
Heat resistance 100% Indestructible (never melts) May melt/deform with hot brakes
Fit precision Extremely high (CNC machined) Slight play / Prone to wear
Use on the circuit / track day Recommended Not recommended (risk of melting)
Service life Lasts a car’s lifetime May crack during tyre change
Vibration damping at 100–130 km/h Maximum stability Good for standard use
2. How to Calculate the Right Centre Ring Size?

A. The Outer Size (Wheel)

The outer size of the centre ring matches exactly with the centre bore (Center Bore / CB) on the rear of your alloy wheel. Popular wheel centre bores include 73.1 mm, 72.6 mm, 67.1 mm and 66.6 mm.

B. The Inner Size (Car)

The inner size of the centre ring matches exactly with the hub diameter of your car. Popular car hub sizes include 57.1 mm (VW/Audi/Seat/Skoda), 66.6 mm (Mercedes/BMW) and 65.1 mm (Volvo/Peugeot/Opel).

C. Notation

A centring ring size is always indicated as [Outer size] x [Inner size]. For example: 73.1 - 57.1 mm means the wheel has a centre bore of 73.1 mm and the car has a hub of 57.1 mm.

3. Popular Hub Sizes by Car Brand (Inner Size)

Below is a handy overview of common hub diameters of the best-known car brands:

Car brand / Manufacturer Standard Hub Diameter (Inner Size of Ring) Common Aftermarket Wheel Size (Outer Size)
Volkswagen, Audi, Seat, Skoda 57.1 mm (also 66.5 mm on newer Audi models) 73.1 mm / 67.1 mm / 72.6 mm
BMW 72.6 mm (E series) / 66.6 mm (G series) 74.1 mm / 73.1 mm
Mercedes-Benz 66.6 mm / 66.5 mm 73.1 mm / 72.6 mm / 67.1 mm
Ford, Volvo, Jaguar 63.4 mm 73.1 mm / 67.1 mm
Opel, Peugeot, Citroën 65.1 mm / 56.6 mm 73.1 mm / 67.1 mm
Toyota, Nissan, Mazda, Hyundai, Kia 67.1 mm / 60.1 mm / 66.1 mm 73.1 mm / 67.1 mm
4. Frequently Asked Questions & Installation Instructions
How do I correctly fit aluminium centring rings?

Follow these steps for a perfect installation:

  1. Clean the vehicle’s wheel hub thoroughly with a wire brush to remove rust and dirt.
  2. Place the aluminium centring ring in the back of the wheel (do not press it onto the vehicle hub beforehand!). Click or slide the ring firmly into the wheel’s hub bore.
  3. Place the wheel onto the vehicle hub and hand-tighten the wheel bolts in a criss-cross pattern.
  4. Finally tighten the wheel bolts with a torque wrench to the specified tightening torque (e.g. 120 Nm or 140 Nm).
Don’t aluminium centring rings seize due to rust/corrosion?

Aluminium can show a slight reaction on steel over time (galvanic corrosion). You can easily prevent this by applying a very thin layer of ceramic grease to the contact surfaces during installation. Never use too much grease on the brakes!

What happens if I drive without centring rings?

If you drive without centring rings with wheels that have a larger centre bore, the wheel is not centred on the hub but on the wheel bolts (lug-centric). This is guaranteed to cause severe vibrations in the steering wheel and the car at speeds from approximately 90 to 130 km/h. In addition, this creates dangerous overloading of your wheel bolts.

? Unsure about the right size for your car or wheels?

Not sure about the exact hub diameter of your car or wheel? Our specialists verify the exact PCD, hub diameter and ET value for every order based on the registration or wheel brand. Feel free to contact us by phone or e-mail for instant sizing advice!

100% Vibration-free High-quality CNC-machined fit
Heat-resistant Will not melt under intensive/sporty use
In Stock Fast delivery or collection in Nijkerk
All Sizes Available For all car brands & wheel brands

Order Aluminium Centring Rings or Need Advice?

View our complete range of aluminium centring rings directly in the webshop or contact our experts in Nijkerk for the exact sizing guide.

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl