Model group: Audi A3, S3 & RS3 8V (2012-2020) & 8Y (2020-Present)
Body styles: 3-Door Hatchback, Sportback, Saloon (Sedan) & Cabriolet
Speciality: Maxton Bodykits, Milltek/Remus Exhausts, KW/ST Coilovers & Concave Wheels
Workshop: Expert Fitting & Fitment Checks in Nijkerk

The Audi A3, S3 and RS3 (generations 8V and 8Y) are among the absolute top of the premium compact segment. Whether you want to sharpen the front of your A3 S-Line with a front splitter, give the rear of your S3 an RS-look diffuser with large exhaust tips, or are looking for the perfect lowering kit and concave wheels: at Wheels 'N Customs in Nijkerk you will find an e-commerce range of over 250,000 items and a professional fitting workshop under one roof.
Book direct advice or fitting in Nijkerk?
\r\nWe fit wheels, exhaust systems, bodykits and styling parts on 2 to 5 cars daily in our Nijkerk workshop. We check every order in advance based on your selected Make, Model, Variant, Year of Manufacture and chassis number. Within 48 hours we will request photos or specific vehicle details via WhatsApp or e-mail if necessary to provide a 100% fitment guarantee. You can order parts separately or combine them directly with professional workshop fitting.
When choosing bodykits it is important to stick to the exact variant and generation. The front bumper of an Audi A3 8V Pre-Facelift (2012-2016) differs significantly from an 8V Facelift (2016-2020) or a newer 8Y (2020+). Filter in the webshop by Make, Model, Variant and Year of Manufacture for the correct match.
Emphasises the wide Singleframe grille of your Audi. Top quality from A-brands such as Maxton Design, Rieger Tuning and Ingo Noak Tuning. Supplied in High Gloss Black, Textured or Carbon-Look ABS plastic including TÜV-/ABE certification.
Gives the rear a muscular motorsport look. Available with fins for dual exhaust tips (S3-style) or large oval trim pieces (RS3-style). Fits seamlessly to the original mounting points.
Tighten the side profile of your Sportback or Limousine with side skirt extensions and a subtle spoiler lip on the tailgate or roof spoiler.
The Audi A3, S3 and RS3 share the VAG MQB platform with a factory bolt pattern of 5x112. Below you’ll find the most chosen, scratch-free wheel and tyre combinations:
| Wheel Diameter | Wheel Width (J) & ET Value | Recommended Tyre Size | Fitment Characteristics |
|---|---|---|---|
| 18 Inch | 8.0J (ET42 - ET45) | 225/40 R18 | OEM+ balance between comfort, tight arch fill and daily usability. |
| 19 Inch | 8.5J (ET42 - ET45) | 235/35 R19 | Most popular choice for A3 S-Line & S3. Fills the wheel arch tightly without rubbing when lowered. |
| 20 Inch | 8.5J (ET45) | 235/30 R20 | Exclusive show stance for S3 and RS3 Limousine/Sportback. Requires precise tyre selection. |
Discover our extensive range in the wheel catalogue from leading brands such as JR-Wheels, Concaver, Rotiform, Veemann, Wheelforce and Z-Performance.
In our spacious, professional workshop in Nijkerk we fit bodykits, exhausts, sidebars and wheel sets to 2 to 5 cars daily. We apply transparent fixed labour rates:
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Fitment Time |
|---|---|---|
| Front Spoiler / Bumper Lip / Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Spoiler Fitment | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitment (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitment (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
| Complete Wheel Set Fitment & Balancing | € 75 - € 115 | 45 - 60 minutes |
Many online tuning webshops act merely as intermediaries without technical knowledge or a physical workshop. Wheels 'N Customs stands out through the unique combination of an e-commerce catalogue with 250,000+ items, A-brand dealerships and our own physical workshop in Nijkerk. We test and fit the products ourselves on a daily basis, giving you 100% certainty about fitment, APK-approval and quality.
To prevent a part from not fitting due to a different bumper (for example an S-Line bumper on a standard Audi A3), we perform a manual fitment check based on Make, Model, Trim and Year. After you place your order we verify your details. If there is any doubt we will request 1 to 2 clear photos of your front or rear bumper via WhatsApp or e-mail within 48 hours. Only after 100% approval will your order be processed or fitted.
Yes. Nearly all our Maxton Design, Rieger and Ingo Noak parts are supplied with official German TÜV / ABE documentation. This means the parts meet all European safety requirements regarding impact resistance and mounting, ensuring a trouble-free inspection in the Netherlands and Belgium.
When buying online you have the right to withdraw your order within 14 days according to European Directive 2011/83/EU. Certain specially made-to-measure items, painted parts or specific custom-import wheels are excluded from the standard right of withdrawal. When returning incorrectly ordered items without prior verification of Make/Model/Trim restocking fees of 25% to 40% may apply for re-inspection and repackaging.
Select your car at www.wheelsandcustoms.nl/Webshop/cat-carrosserie to instantly filter all exactly fitting A3 / S3 / RS3 styling parts.
Indicate during checkout whether you want the parts delivered to your home or if you want them fitted scratch-free in our workshop in Nijkerk.
Pay via iDEAL, Bancontact, Creditcard, PayPal, Klarna or In3 (in instalments). If you choose fitting, our customer service will contact you immediately to schedule the fitting date.
Do you have specific questions about fitment on your Audi A3, S3 or RS3, would you like advice on the ideal ET value or would you like an all-in quote including professional workshop fitting in Nijkerk?
Our specialists are ready to support you personally.