Model generation 8V & 8V.2 Facelift (2012-2020) | 3-door, Sportback, Saloon & Cabriolet | TFSI, TDI, S3 Quattro & RS3 2.5 TFSI

Why is correct wheel fitment crucial for the Audi A3, S3 and RS3 (8V)?
The Audi 8V generation on the MQB platform is incredibly popular in the styling tuning scene. Factory A3 and S3 models ride on fairly conservative wheels with high ET values (ET46-ET51). If you want the car to have a tight, sporty wheel fitment without rubbing, track width and ET must be chosen very precisely. On the powerful RS3 8V the spoke design also plays a crucial role to provide clearance for the massive 8-piston RS front calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year of Manufacture and chassis number.
The values below represent the original factory parameters of the Audi A3, S3 and RS3 (8V). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5-lug bolt circle on the MQB platform. |
| Centre bore (CB) | 57.1 mm | Common VAG centre bore. Hub rings required for wheels with a larger centre bore. |
| Wheel fastener type | M14 x 1.5 Conical Bolts | 120 Nm torque recommended by Audi. |
| OEM Wheel sizes (A3 / S3) | 7.5J x 17 ET51 / 7.5J x 18 ET51 / 8.0J x 19 ET49 | Factory S-Line and S3 cast wheels (e.g. Rotor, Wing or V-spoke design). |
| OEM Wheel sizes (RS3 8V) | 8.0J x 19 ET49 all round (or 8.5J ET53 front / 8.0J ET47 rear reverse staggered) | Specific RS wheels with extra caliper clearance. |
| OEM Tyre sizes | 225/45 R17 / 225/40 R18 / 235/35 R19 (255/30 R19 for front on RS3) | Must be fitted with AO (Audi Original) or XL (Extra Load) marking. |
Would you like to give your Audi A3, S3 or RS3 8V a tighter fill of the wheel arches or save weight with Flow Formed wheels from brands such as Concaver, JR-Wheels, Rotiform, Veemann, Borbet or Rieger/Maxton-styling? Below you can see the ideal sizes for a scratch-free fit, also when lowered with Eibach or H&R lowering springs.
| Wheel Diameter | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size | Fitment Characteristic |
|---|---|---|---|---|
| 18 Inch (OEM+ Comfort / Winter) | 8.0J | ET42 - ET45 | 225/40 R18 | Excellent everyday balance while retaining comfort. Ideal for winter sets. |
| 19 Inch (Absolute Sweet Spot) | 8.5J | ET42 - ET45 | 235/35 R19 | The most popular size for the 8V. Fills the wheel arches tightly flush, 100% scratch-free. |
| 20 Inch (Exclusive Show Stance) | 8.5J | ET45 | 235/30 R20 | Maximum visual impact. Tight fill of the arches on a coilover or lowering springs. |
Do you want to push the original 18" S-Line or 19" Rotor/S3 wheels (7.5J/8.0J ET49-ET51) a little further out to make them sit tighter in the wheel arches?
In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Fitment Time |
|---|---|---|
| Complete Wheel Set Fitment & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Fitment | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitment (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitment (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT-certainty.
In our webshop you can filter parts by Brand, Type, Specification and Year (we deliberately do not use a licence plate filter to avoid incorrect database connections). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes and wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Rieger/Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, customised drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi A3, S3 or RS3 (8V), would you like advice about brake caliper clearance/wheel spacers or would you like an all-in quote including workshop fitting in Nijkerk?