Model generation C8 Type 4F (2019-present) | Engines: 4.0 TFSI V8 Twin-Turbo Quattro (600 hp & 630 hp Performance)

Why is correct wheel fitment crucial for the Audi RS6 Avant (C8)?
The Audi RS6 Avant C8, with its extensively widened bodywork (40 mm wider per side compared to a standard A6 Avant), 600 HP V8 twin-turbo engine and optional 440 mm ceramic brake discs, is a powerhouse. Wheels for the RS6 C8 require extreme ET values to fill the wide arches, a minimum load rating of 850-950 kg per wheel, and a specific spoke design for caliper clearance. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the Audi RS6 C8. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5-stud bolt circle. |
| Centre bore (CB) | 66.5 mm / 66.6 mm | Large MLB-Evo centre bore. Centre rings required for non-matching hub holes. |
| Wheel fixing type | M14 x 1.5 Ball-conical Bolts | 160 Nm tightening torque recommended by Audi Sport. |
| Minimum load rating | 850 kg per wheel | Necessary due to high axle loads with full load and RS dynamics. |
| OEM wheel sizes | 10.5J x 21 ET19 / 10.5J x 22 ET19 | Factory cast or forged 10-spoke / 5-V-spoke RS wheels. |
| OEM tyre sizes | 275/35 R21 / 285/30 R22 | Must be fitted with AO (Audi Original) and XL (Extra Load) coding. |
Do you want to give your RS6 C8 an even more aggressive wide-stance or exclusive Flow Formed/Forged wheels from brands like Concaver, Rotiform, JR-Wheels, Veemann or custom Forged wheels? Below you’ll find the ideal sizes for a scratch-free fit, also when lowered with Cete, KW or H&R modules.
| Wheel Size (inch) | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size | Fitment Characteristic |
|---|---|---|---|---|
| 21 Inch (OEM+ Winter Set) | 10.5J | ET15 - ET19 | 275/35 R21 | Standard comfort size, excellent for performance winter tyres. |
| 22 Inch (Sweet Spot Performance) | 10.5J / 11.0J | ET12 - ET15 | 285/30 R22 (or 295/30 R22 on 11.0J) | Most popular choice. Fills the wide arches without scratching, retains steering precision. |
| 23 Inch (Exclusive Show Stance) | 10.5J / 11.0J | ET10 - ET15 | 295/25 R23 (or 305/25 R23) | Maximum visual impact. Completely fills the massive RS6 wheel arches for a tight look. |
Do you want to push the original 21" or 22" RS wheels (10.5J ET19) slightly further out so they sit flush with the fender extensions?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Service | Labour Rate (Excl. VAT) | Indicative Fitment Time |
|---|---|---|
| Complete Wheel Set Fitment & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Lip / Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitment | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitment (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitment (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT-certainty.
In our webshop you can filter parts by Brand, Type, Specification and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 or 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all of our alloy wheels, lowering kits from Eibach/H&R/KW and exhaust systems from Akrapovi?/Milltek/Remus have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification restocking charges of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi RS6 Avant C8, would you like advice on compatibility with ceramic brakes or would you like an all-in quote including workshop fitting in Nijkerk?