Model generation G30 Sedan & G31 Touring (2017-2023) | 520i up to M550i, 530e Plug-in Hybrid & xDrive | CLAR Platform

Why is correct wheel fitment crucial for the BMW 5 Series (G30 / G31)?
The BMW 5 Series (G30 Sedan and G31 Touring) combines executive class with dynamic driving characteristics. If the wheels are not fitted with the correct width balance and ET value beneath the car, this can lead to rubbing in the generous wheel arches or faults in the xDrive four-wheel-drive system. In addition, spokes on M-Sport versions must provide sufficient caliper clearance for the blue or red M-Performance brakes. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the BMW 5 Series G30 Sedan and G31 Touring. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Modern CLAR-platform bolt pattern (note: different from the old F10/F11 5x120 bolt pattern). |
| Centre bore (CB) | 66.6 mm | New BMW centre bore standard. Centre rings required for wheels with a larger hub bore. |
| Wheel fixing type | M14 x 1.25 Bolts | Conical 60-degree seat. Torque setting 140 Nm. |
| OEM wheel sizes (19" staggered) | Front: 8.0J x 19 ET30 Rear: 9.0J x 19 ET44 |
Factory M-Sport staggered setup (e.g. Styling 664M or 845M). |
| OEM wheel sizes (20" staggered) | Front: 8.0J x 20 ET30 Rear: 9.0J x 20 ET44 |
Factory M Performance forged or cast wheels (e.g. Styling 668M or 759M). |
| OEM Tyre Sizes (Full Set) | Front: 245\/40 R19 (or 245\/35 R20) Rear: 275\/35 R19 (or 275\/30 R20) |
Exactly matching rolling circumference required to protect xDrive. XL (Extra Load) designation. |
Do you want to give your BMW G30 or G31 a tighter, deep concave fill of the wheel arches with premium wheels from Concaver, JR-Wheels, Veemann, Rotiform or Z-Performance? Below you will find the ideal sizes for a scratch-free fit, also when lowered with Eibach or H&R lowering springs.
| Wheel Size & Construction | Position | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size |
|---|---|---|---|---|
| 19 Inch (OEM+ Comfort Full Set) | Front Rear |
8.5J 9.5J |
ET25 - ET28 ET38 - ET42 |
245/40 R19 275/35 R19 |
| 20 Inch (Sweet Spot M-Sport Full Set) | Front Rear |
8.5J / 9.0J 10.0J |
ET25 - ET28 ET40 - ET42 |
245\/35 R20 275\/30 R20 (or 285\/30 R20) |
| 21 Inch (Exclusive Show Stance) | Front Rear |
9.0J 10.0J / 10.5J |
ET28 ET42 - ET45 |
245/30 R21 285/25 R21 |
Do you want to push the original 19" or 20" M-Sport wheels (8.0J ET30 front \/ 9.0J ET44 rear) slightly further out to make them sit flush with the wheel arch edges?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Service | Fitting Rate (Excl. VAT) | Indicative Fit Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT compliance assurance.
In our webshop you can filter parts by Brand, Type, Trim and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to cancel your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Trim restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your BMW 5 Series (G30/G31), would you like advice on xDrive tyre sizes or would you like an all-in quote including workshop fitting in Nijkerk?