Bolt Information

Wheels 'N Customs Icon
WHEELS 'N CUSTOMS
TECHNICAL KNOWLEDGE GUIDE: WHEEL BOLTS & WHEEL NUTS

Do your wheels have a conical or ball seat?

One of the most common questions when fitting new wheels is which type of wheel bolt or wheel nut should be used. The seat type (where the bolt or nut clamps against the wheel) is crucial for a safe, vibration-free fitment.

3 Important Rules of Thumb:

  • Steel wheels: Almost always have a ball seat.
  • Original factory wheels: Branded wheels supplied from the factory usually have a ball seat.
  • Aftermarket alloy wheels: Virtually all aftermarket wheels (such as JR-Wheels, Concaver, Ispiri, etc.) have a conical seat (60 degrees).

How do you check the seat?

You can easily check this by loosening an existing wheel bolt or wheel nut and looking at the contact surface:

  • Conical seat: The contact surface tapers at a straight angle (taper / 60° angle).
  • Ball seat: The contact surface has a rounded, domed shape (R12, R13 or R14 radius).
Difference Between Conical and Ball Seat

Visual difference between a conical (tapered) and ball (rounded) seat.

Overview of Different Types

1. Ball-Seat Bolts (Radii)

The rule of thumb “a ball is a ball” unfortunately does not apply. There are different radii (the curvature of the head):

  • R12 Radius: Commonly used by VW (M12 bolts).
  • R13 Radius: Commonly used by VW, Audi, Seat and Skoda (M14 bolts).
  • R14 Radius: Commonly used by Mercedes-Benz and Porsche.

2. Flat-Seat Bolts

French brands such as Peugeot and Citroën regularly use flat-seat/flat wheel bolts. Wheels 'N Customs supplies these from stock up to a length of 60mm, which also enables the installation of wheel spacers on original wheels.

3. Sliding Bolts / Spring Bolts (Variable PCD)

With sliding bolts (equipped with a separate, floating conical or ball-seat ring) a small difference between the car’s bolt pattern and the wheel can be bridged safely. The maximum difference that can be bridged is 2.5mm (e.g. a 5x110 wheel on a 5x112 car).

Wheels 'N Customs range:

We supply wheel bolts and nuts with hex size 17mm up to 22mm, and shank lengths ranging from 11mm up to 60mm. Also available as Allen/tuner bolts and in various finishes such as Black, Chrome, Gold or Silver.

Most Common Thread Types by Car Brand

Each car brand uses specific thread sizes. Refer to the overview below as a guideline:

Nuts M12 x 1.5 mm:
Fits most models of: Honda, Acura, Kia, Toyota, Lexus, Mazda, Mitsubishi, Alfa Romeo, Chrysler, Daihatsu, Ford, Hyundai, Citroën, Dodge, Lotus, Volvo, Infiniti.

Nuts M12 x 1.25 mm:
Fits most models of: Nissan, Subaru, Suzuki, Toyota, Opel, Renault.

Bolts M12 x 1.5 mm:
Fits most models of: Alfa Romeo, Citroën, Fiat, Opel, Peugeot, Renault, Seat, Skoda, BMW, Hyundai, Kia, Mercedes-Benz, Volkswagen, Volvo.

Bolts M12 x 1.25 mm:
Fits most models of: Alfa Romeo, Citroën, Fiat, Peugeot, Seat, Volvo.

Bolts M14 x 1.5 mm:
Fits most models of: Audi, Volkswagen, Seat, Skoda, BMW, Mercedes-Benz, Porsche, Volvo, Renault.

Bolts M14 x 1.25 mm:
Fits most newer models of: MINI and BMW.

???? Tip: You can always look up your exact factory specifications for verification via www.wheel-size.com or contact us!

Have questions or unsure about the correct size?

Our wheel and fitting specialists are happy to help to guarantee a 100% fit.

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl