Model generation MK8 & MK8.5 Facelift (2017-2023) | Engines: 1.5 EcoBoost Turbo 3-Cylinder (200 hp) | Quaife Limited Slip Differential

Why is correct wheel fitment crucial for the Ford Fiesta ST (MK8)?
The Ford Fiesta ST MK8 is a celebrated driver's car with a playful chassis and an optional Quaife mechanical limited-slip differential. Ford uses the specific 4x108 bolt pattern on this model with a relatively high factory offset (ET47.5). Anyone wanting the wheels to sit wider and tighter in the arches must pay close attention to the ET value and wheel width to avoid rubbing on the inner liners during sporty cornering. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Ford Fiesta ST MK8. Use these as technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 4x108 | Standard Ford 4-lug bolt circle. |
| Centre bore (CB) | 63.4 mm | Known Ford centre bore. Hub rings required for wheels with a larger centre bore. |
| Wheel fastener type | M12 x 1.5 Wheel nuts | Torque of 135 Nm recommended by Ford Performance. |
| OEM Wheel sizes | 7.5J x 17 ET47.5 / 7.5J x 18 ET47.5 | Factory 5-spoke or Flow Formed Ford Performance alloy wheels. |
| OEM Tyre sizes | 205/45 R17 / 205/40 R18 | Factory fitted with Michelin Pilot Super Sport / Pilot Sport 4 tyres. |
Would you like to give your Fiesta ST MK8 a wider track or save weight with lightweight wheels from brands such as JR-Wheels, Borbet, Sparco, Rotiform, Veemann or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, even when lowered with Eibach or H&R lowering springs.
| Wheel diameter | Recommended Rim Width (J) | Ideal ET Range | Recommended Tyre Size | Fitment Characteristics |
|---|---|---|---|---|
| 17 Inch (Pure Track Performance) | 7.5J / 8.0J | ET38 - ET42 | 205\/45 R17 (or 215\/45 R17 on 8.0J) | The most popular size for steering feel and track days. More tyre sidewall for ultimate grip. |
| 18 Inch (Sweet Spot Street Look) | 7.5J / 8.0J | ET38 - ET42 | 205\/40 R18 (or 215\/40 R18) | Visually the cleanest wheel-arch fill, 100% scratch-free with a lowered suspension. |
| 18 Inch (Aggressive Stance) | 8.0J | ET35 - ET38 | 205/40 R18 | Maximum track width for the road. Fills the arches flush without rubbing. |
Do you want to push the original 17" or 18" ST wheels (7.5J ET47.5) slightly further out to make them sit tighter in the wheel arches?
In our spacious and professional workshop in Nijkerk we mount wheels, exhausts, bodykits and suspension daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Installation Time |
|---|---|---|
| Complete Wheel Set Mounting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Lip / Bumper Lip / Splitter Installation | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT (APK) certainty.
In our webshop you can filter parts by Brand, Type, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Version restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Ford Fiesta ST MK8, would you like advice on lightweight Flow Formed wheels or would you like an all-in quote including workshop fitting in Nijkerk?