Ford Ranger Raptor Wheels Fitment, Bolt Pattern & Off-road Guide

Ford Ranger Raptor Wheels Fitment & Specifications Guide

Model generations 1st Gen & 2nd Gen (2019-present) | Engines: 2.0 EcoBlue Bi-Turbo & 3.0 V6 EcoBoost Twin-Turbo | FOX Live Valve Shocks

Ford Ranger Raptor Wheels Fitment Guide Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Ford Ranger Raptor?
The Ford Ranger Raptor is the ultimate high-performance pick-up on grey licence, featuring a widened track, FOX Position Sensitive / Live Valve dampers and the robust 6x139.7 bolt pattern. Choosing the correct wheel width and offset is essential to avoid disturbing the unique suspension geometry, to provide sufficient clearance around the brake calipers and to prevent large All-Terrain (A/T) or Mud-Terrain (M/T) tyres from contacting the body at full suspension travel. At Wheels 'N Customs in Nijkerk we pre-check every order based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Ford Ranger Raptor

The values below represent the original factory parameters of the Ford Ranger Raptor. Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory value (OEM) Notes & Advice
Bolt Pattern (PCD) 6x139.7 Standard 6-stud bolt circle for heavy-duty pick-ups & 4x4s.
Centre Bore (CB) 93.1 mm Specific Ford centre bore. Hubcentric rings required if larger centre holes are used.
Wheel Fastening Type M12 x 1.5 Wheel Nuts Torque of 135 Nm to 140 Nm recommended.
Minimum Load Rating 950 kg per wheel Required due to kerb weight, high axle loads and grey licence use.
OEM Wheel Sizes 8.5J x 17 ET55 (or 8.5J x 17 ET35-ET55 on Next-Gen 3.0 V6) Factory reinforced Dyno Grey or Matte Black 17" alloy wheels.
OEM Tyre Sizes 285/70 R17 (BFGoodrich All-Terrain T/A KO2) Rugged offroad tyre size with high sidewall and reinforced carcass.

2. Aftermarket Fitment Guide (17", 18" & 20")

Do you want to give your Ranger Raptor an even more aggressive wide-stance or reinforced 4x4 wheels from brands like JR-Wheels (JR-X Series), Borbet Commercial, Concaver, Rotiform or dedicated Offroad rims? Below you’ll find the ideal sizes for a scratch-free fit.

Wheel diameter Recommended Rim Width (J) Ideal ET Value Range Recommended Tyre Size Fitment Characteristic
17 Inch (Pure Offroad & Overland) 8.5J / 9.0J ET20 - ET35 285\/70 R17 (or 315\/70 R17 with lift kit) Maximum tyre sidewall for extreme offroad grip and rim protection on rough terrain.
18 Inch (Perfect Balance Street\/Terrain) 9.0J ET20 - ET30 285\/65 R18 (or 295\/65 R18) Most popular size for grey-plate daily use. Tight filling of the wheelarches.
20 Inch (Aggressive Street & City Stance) 9.0J / 9.5J ET15 - ET25 285\/50 R20 (or 305\/50 R20) Clear visual presence on the road. Fills the wide fender flares scratch-free.

3. Wheel Spacers & Bolt Pattern Adapters for Ford Ranger Raptor

Do you want to push the original 17" Raptor wheels slightly further out so they sit flush with the widened fender caps?

  • Wheel Spacers (Spacers): On the original 17" wheels aluminium spacers with integrated stud-ends of 25 mm to 30 mm per side can be mounted. Use only hub-centric spacers with the specific 93.1 mm hub bore and reinforced steel wheel nuts.
  • Bolt Pattern Adapters & Fitment Check: Have you got an exclusive wheel set in mind with a different bolt pattern (e.g. 6x139.7 to 5x127 or 6x114.3)? Bolt pattern adapters solve this, but require a minimum thickness of 25 mm to 35 mm. Our fitment specialists in Nijkerk calculate the total ET value in advance to prevent the tyres from contacting the wheelarch liners when the FOX dampers compress.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspensions to 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you can filter parts by Brand, Type, Specification and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, sidebars/bullbars and exhaust systems have official German TÜV, ECE or EC certification. This guarantees a trouble-free MOT inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Ford Ranger Raptor, would you like advice about the required load-rating/off-road tyres or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl