Model generation i30 N Hatchback & Fastback (2017-present) | Engines: 2.0 T-GDi (250 hp, 275 hp Performance & 280 hp N-DCT Facelift)

Why is correct wheel fitment crucial for the Hyundai i30 N?
The Hyundai i30 N is the acclaimed hot hatch from the workshop of Albert Biermann, developed on the Nürburgring Nordschleife. The car comes from the factory on wheels with an exceptionally high ET value (ET55). Anyone wanting the wheels to sit a little further out for a more aggressive stance must pay attention to the ET value, the 67.1 mm centre bore and the spoke design because of the bright red N-Performance calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Hyundai i30 N (Hatchback & Fastback). Use these as a technical reference when purchasing new wheels or hubcentric rings.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x114.3 | Standard Asian 5-stud bolt circle. |
| Centre bore (CB) | 67.1 mm | Specific Hyundai/Kia centre bore. Centring rings required for larger wheel hub holes. |
| Wheel fastening type | M12 x 1.5 Wheel nuts | Recommended tightening torque 110 Nm to 120 Nm by Hyundai N. |
| OEM Wheel sizes | 7.5J x 18 ET53 (250 hp) / 8.0J x 19 ET55 (Performance & FL Forged) | Factory 18" or 19" cast or forged N-Performance wheels. |
| OEM Tyre sizes | 225/40 R18 / 235/35 R19 | Factory fitted with specific Pirelli P Zero HN (Hyundai N) tyres. |
Do you want to give your Hyundai i30 N a tighter filling of the wheel arches or save weight with lightweight Flow Formed wheels from brands like JR-Wheels (SL01), Borbet, Concaver, Rotiform, Veemann or Maxton-styling? Below you will find the ideal sizes for scratch-free fitment, also when lowered with Eibach or H&R lowering springs.
| Wheel diameter (inch) | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size | Fitment Characteristics |
|---|---|---|---|---|
| 18 Inch (Trackday / Winter set) | 8.0J / 8.5J | ET42 - ET48 | 225/40 R18 (or 235/40 R18 on 8.5J) | Excellent choice for the Nordschleife or winter. More tyre sidewall for sharper steering response. |
| 19 Inch (Sweet Spot Performance) | 8.5J | ET45 - ET50 | 235/35 R19 | The most popular size. Brings the wheels flush with the wheel arch edges, 100% scratch-free. |
| 19 Inch (Aggressive Stance) | 8.5J | ET40 - ET42 | 235/35 R19 | Maximum visual track width. Fills the arches very tightly without rubbing. |
Do you want to push the original 19" Hyundai N wheels (8.0J ET55) slightly further out for increased track width?
In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and chassis components on 2 to 5 cars. We use transparent fixed rates (excl. VAT):
| Part / Activity | Labour Rate (Excl. VAT) | Indicative Installation Time |
|---|---|---|
| Complete Wheel Set Fitment & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Fitment | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitment (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitment (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you can filter parts by Brand, Type, Specification and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database connections). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 or 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, customised drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Hyundai i30 N, would you like advice on lightweight Flow Formed track wheels or would you like an all-in quote including workshop fitting in Nijkerk?