Model generations 991 (2011-2019) & 992 (2019-present) | Carrera, Carrera S/4S, GTS, Turbo, GT3 | Narrow & Wide Bodies
Why is exact wheel fitment crucial for the Porsche 911?
The Porsche 911 is the iconic rear-engined sports car where weight distribution, brake cooling and tyre rolling circumference (with PTM 4WD) are extremely sensitive. Choosing the correct stagger with extreme rear wheel widths (up to 11.5J or 12J) requires precise offset knowledge. Especially important is the distinction between narrow bodies and widened rear wings (Wide Body / Turbo Body) or Centerlock hub options. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.
The table below contains the original factory parameters of the Porsche 911. Use this data as a technical reference for your wheel or track spacer choices.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x130 (or Centerlock) | Classic Porsche 5x130 bolt pattern or central wheel nut on GTS/GT3/Turbo. |
| Hub bore (CB) | 71.6 mm | Specific Porsche hub fitment for the 5x130 variant. |
| Wheel fastener type | M14 x 1.5 Conical Bolts | Conical (Radius R14) wheel bolts with a tightening torque of 160 Nm. |
| OEM 991 stagger sizes | Front: 8.5J x 20 ET51 Rear: 11.0J x 20 ET70 (Narrow) / ET52 (Wide) |
Difference in rear ET between narrow Carrera RWD and wide Carrera 4S/GTS. |
| OEM 992 stagger sizes | Front: 8.5J x 20 ET53 (or 8.5J x 19 ET52) Rear: 11.5J x 21 ET67 (or 11.0J x 20 ET66) |
The 992 factory-fit stagger uses larger diameter wheels (20" front / 21" rear). |
Do you want to fill the wheel arches of your Porsche 911 991 or 992 tightly with brand-name wide sets from Concaver, Rotiform, JR-Wheels or custom Forged wheels? Below you will find the proven sizes that fit without scratching or rubbing, even with a lowered KW or H&R suspension.
| Generation & Size | Position | Recommended Rim Width (J) | Ideal ET Range | Recommended Tyre Size |
|---|---|---|---|---|
| Porsche 991 (20" Wide Set) | Front Rear (Narrow) Rear (Wide) |
8.5J / 9.0J 11.0J 11.5J / 12.0J |
ET45 - ET50 ET60 - ET65 ET45 - ET50 |
245/35 R20 305/30 R20 305/30 R20 (or 315/30 R20) |
| Porsche 992 (20"/21" Staggered) | Front Rear |
8.5J / 9.0J 11.5J / 12.0J |
ET48 - ET52 ET58 - ET64 |
245/35 R20 (or 255/35 R20) 305/30 R21 (or 315/30 R21) |
| Porsche 992 (21"/22" Show Stance) | Front Rear |
9.0J 12.0J |
ET45 ET58 |
255/30 R21 325/25 R22 |
Do you want to push the original Porsche Carrera or Turbo wheels slightly further out for track width, or are you looking for a solution for non-standard wheels?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Operation | Labour Rate (Excl. VAT) | Indicative Labour Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e‑commerce shops act purely as intermediaries without a physical workshop or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and APK-certainty.
In our webshop you filter parts by Brand, Type, Specification and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 or 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW and exhaust systems have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior checking of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Porsche 911 (991/992), would you like advice on Centerlock wheels or would you like an all-in quote including workshop fitting in Nijkerk?