Project Showcase: Audi RS6 C8 on Custom 22-inch Vossen Wheels

Vehicle: Audi RS6 Avant (C8 Generation)

Chosen Wheels: Vossen Hybrid Forged HF-5 (Deep Concave)

Dimensions: 22x10.5J ET19 all round in Gloss Black

Tyre size: 285/30 R22 Michelin Pilot Sport 4S

Audi RS6 C8 fitted with 22 inch Vossen HF-5 wheels at Wheels N Customs

When a customer drives a **Audi RS6 Avant (C8)** into the **Wheels 'N Customs** workshop, it’s never just a wheel swap. An icon with 600 hp, 800 Nm of torque and optional massive 440 mm **Audi Ceramic brake discs** places extreme demands on wheel construction, caliper clearance and axle load. In this Project Showcase we take you through the technical choices and challenges of this successful transformation.

The Challenge & Solution:
The Audi RS6 C8 has extremely wide arches but requires a specific offset (ET) to accommodate the gigantic 10-piston ceramic calipers. With a bespoke set of Vossen HF-5 in 22x10.5J ET19 we achieved a perfectly straight "Flush" fitment that lines up exactly with the wheel arch edges, without spacers and with 100% retention of the factory air suspension.

1. Technical Specifications of the Build

Component Factory specification Wheels 'N Customs Upgrade
Wheel model Audi Sport 21" / 22" Cast Vossen HF-5 Hybrid Forged (Gloss Black)
Wheel size & Width 22x10.5J ET19 22x10.5J ET19 (Custom CNC Machined)
Caliper clearance Standard OEM clearance Guaranteed > 6mm clearance on Ceramic Calipers
Tyres 285/30 R22 Hankook/Pirelli 285/30 ZR22 Michelin Pilot Sport 4S (AO)
TPMS Sensors OEM Direct TPMS 433MHz Programmed Black Metal TPMS Sensors

2. The Challenges during the Project

  • 1. Clearance for Ceramic Brake Discs: With a diameter of 440 mm at the front, the RS brakes almost completely fill the inner wheel barrel. The Y-spokes of the Vossen HF-5 have a 'Deep Concave' profile, which meant the X-factor of the spokes had to be checked precisely to prevent contact with the caliper.
  • 2. Managing Unsprung Mass: A heavy car like the RS6 benefits from lighter rotational mass. Thanks to Vossen’s **Hybrid Forged (Flow Formed)** technology, this 22-inch wheel is, despite its 10.5J width, significantly lighter than the standard cast factory wheel. This results in a sharper steering response.
  • 3. Preserving Dynamic Ride Control (DRC) / Air Suspension: The fitment is calculated so the wheels clear the inner liners in both the highest air-suspension setting and the lowest 'Dynamic' mode at full lock.
Vossen HF-5 detail on Audi RS6 C8 Caliper clearance Vossen wheel on Audi RS6 Flush fitment rear of Audi RS6 Vossen

3. The Result & Customer Experience

The end result is an Audi RS6 that looks more aggressive, wider and tighter than when it left the factory. The patented gloss black finish of the Vossen HF-5 wheels forms a fantastic contrast with the paint and the red RS calipers. Thanks to the fitment of **Michelin Pilot Sport 4S** tyres, motorway comfort is retained while dry and wet grip is lifted to an even higher level.

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl