Model generation GR Yaris (2020-present) | Engines: 1.6 G16E-GTS Turbo 3‑Cylinder (261 hp / 280 hp) | GR‑Four AWD System

Why is correct wheel fitment crucial for the Toyota GR Yaris?
The Toyota GR Yaris is a true WRC homologation special with advanced GR‑Four four‑wheel drive, a carbon fibre roof and extensively widened rear wings. The car requires lightweight wheels with a tight offset (ET value) to fill the arches, while leaving sufficient spoke clearance around the large 356 mm 4‑piston GR calipers. At Wheels 'N Customs in Nijkerk we pre‑check every order based on your selected Brand, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the Toyota GR Yaris. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt Pattern (PCD) | 5x114.3 | Standard Japanese 5‑lug bolt circle. |
| Centre Bore (CB) | 60.1 mm | Specific Toyota centre bore. Hub rings required for larger centre bores. |
| Wheel Fastening Type | M12 x 1.5 Wheel Nuts | Torque 103 Nm (flat seat with washer on OEM wheels / conical on aftermarket). |
| OEM Wheel Sizes | 8.0J x 18 ET45 | Factory Enkei cast wheels or BBS forged wheels (Circuit Pack). |
| OEM Tyre Models | 225/40 R18 | Dunlop SP Sport MAXX 050 or Michelin Pilot Sport 4S (Circuit Pack). |
Do you want to give your GR Yaris an even more aggressive track/stance look with lightweight Flow Formed or Forged wheels from brands like JR-Wheels (SL01 Superlight), Concaver, Rotiform, Veemann or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, also when lowered with KW, Eibach or H&R coilovers.
| Wheel diameter (inch) | Recommended Wheel Width (J) | Ideal ET Value Range | Recommended Tyre Size | Fitment Characteristic |
|---|---|---|---|---|
| 18 Inch (OEM+ Track Performance) | 8.5J | ET35 - ET40 | 235/40 R18 (or 245/40 R18) | The ideal trackday setup. Wider track, scratch-free at suspension compression on the Nordschleife. |
| 18 Inch (Flush Stance) | 9.0J / 9.5J | ET30 - ET35 | 245/35 R18 (or 255/35 R18) | Aggressive wheel arch fill. Fills the wide GR rear arches tightly. |
| 19 Inch (Exclusive Street Look) | 8.5J / 9.0J | ET35 - ET38 | 235/35 R19 | Maximum visual presence for street use. |
Do you want to push the original 18" Enkei or BBS Circuit Pack wheels (8.0J ET45) slightly further out for a wider track?
In our spacious and professional workshop in Nijkerk we mount wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Installation Time |
|---|---|---|
| Complete Wheel Set Mounting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Lip / Bumper Lip / Splitter Installation | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you can filter parts by Brand, Type, Specification and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e‑mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design carry official German TÜV, ECE or ABE certification. This guarantees a hassle‑free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially ordered bespoke items, custom drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Toyota GR Yaris, would you like advice on lightweight Flow Formed track wheels, or would you like an all‑in quote including workshop fitting in Nijkerk?