Does the yellow/orange warning light of the Tyre Pressure Monitoring System (TPMS) illuminate on your dashboard after fitting a new set of alloy wheels or during a seasonal tyre change? Since November 2014 a functioning tyre pressure monitoring system has been mandatory for all newly registered passenger cars in the EU. A lit TPMS light will inevitably lead to MOT failure.
In this guide from Wheels 'N Customs we explain the fundamental difference between Direct and Indirect TPMS, provide a clear step-by-step plan for learning or cloning TPMS valves per car brand, and show how faults are resolved smoothly and professionally.
Before you purchase new wheels or learn sensors, it is crucial to know which TPMS system your car manufacturer uses:
| TPMS Type | Operation & Sensors | New Sensors Needed? | Typical Car Brands |
|---|---|---|---|
| Direct TPMS (Active) | Physical battery-powered sensor in each valve; transmits bar/PSI & temperature wirelessly. | YES (4 separate sensors) | BMW, Mercedes, Tesla, Ford, Hyundai, Kia |
| Indirect TPMS (Passive) | No sensors in the wheel; calculates rolling circumference via existing ABS sensors. | NO (No valve sensors) | Volkswagen, Audi, Seat, Skoda, Volvo (most) |
When purchasing new wheels with Direct TPMS there are three ways to correctly link the sensors to your car’s onboard computer:
Read the unique ID codes of your original wheels via an OBD2 diagnostic tool and program them 1-to-1 onto the new TPMS sensors. The advantage: your car cannot tell the difference between summer and winter sets. You will never need to relearn when switching seasons!
Fit the newly configured sensors. Select the option "Tyre Pressure Reset / Calibrate" in the iDrive / MBUX / onboard computer menu. Then drive continuously for 10 to 20 minutes on the motorway above 30 km/h until the car automatically recognises the new frequency (433 MHz or Bluetooth for Tesla).
Applicable to various Asian and American brands (Toyota, Nissan, Ford). A specialist connects a TPMS diagnostic tool to the physical OBD2 port under the steering wheel to manually write the new sensor positions (LF, RF, LR, RR) into the memory.
TPMS sensors contain a non-replaceable built-in battery. After an average of 5 to 7 years (or approx. 120,000 km) the battery is depleted. The signal drops intermittently, especially at low outside temperatures.
Inexpert tyre mounting with a tyre machine can break the aluminium or rubber valve mechanism on the inside of the wheel. At Wheels 'N Customs we apply strict TPMS dismounting/mounting protocols.
Do you need new TPMS sensors for your new wheel set or want a persistent tyre pressure fault read out? In our professional workshop in Nijkerk we have advanced OBD2 TPMS diagnostic equipment. We program, clone and fit sensors scratch-free and vibration-free.
Our electronics and wheel specialists will gladly check, based on your registration number, which TPMS protocol is required.
We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".