The Mercedes-Benz A-Class (W177 Hatchback & V177 Sedan) has a very clean design. Wheels 'N Customs explains how to prevent the wheels from rubbing the arches.
Straight to the answer (TL;DR):
The W177 has a 5x112 bolt pattern with a 66.6 mm centre bore. For standard A-Class models we recommend a maximum of 19x8.5J ET45 to ET48 with 225/35/19 tyres to avoid rubbing.
| Specification | Mercedes A-Class W177 Sizing |
|---|---|
| Bolt pattern (PCD) | 5x112 |
| Hub diameter (Center Bore) | 66.6 mm |
| Mounting (Thread size) | Bolt: M14 x 1.5 (Tightening torque 130 Nm) |
| Standard OEM sizes | 18x7.5J ET49 (225/45/18) or 19x7.5J ET49 (225/40/19) |
| Model Variant | Wheel size | Ideal ET value | Recommended tyre size |
|---|---|---|---|
| A-Class W177 (AMG-Line) | 19x8.5J | ET 45 - ET 48 | 225/35/R19 |
| A35 AMG 4MATIC | 19x8.5J | ET 42 - ET 45 | 235/35/R19 |
| A45 / A45 S AMG (Wide arches) | 19x8.5J or 20x8.5J | ET 40 - ET 42 | 245/35/R19 or 245/30/R20 |
Most aftermarket wheels (such as Veemann or GMP) are produced with a 66.6 mm centre bore specifically for Mercedes and Audi. In that case, centring rings are not needed. Do the wheels have a 72.6 mm bore? Then we supply spigot rings.
We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".