Model generation T6.1 Facelift (2019-2024) | Variants: T28, T30, T32, Bulli, Highline, Multivan & 4Motion | 2.0 TDI

Why is correct wheel fitment crucial for the VW Transporter T6.1 on a grey licence plate?
The Volkswagen Transporter T6.1 is the undisputed favourite for commercial use and camper conversions. Because a T6.1 on a grey licence plate (especially in the heavy T30 and T32 load variants) faces high axle loads, legislation imposes strict requirements on wheel load capacity. Fitting wheels without Commercial certification leads to dangerous situations and rejection. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Brand, Model, Variant, Year of Manufacture and chassis number.
The values below represent the original factory parameters of the VW Transporter T6.1. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x120 | Standard VW Bus bolt pattern (identical to T5 and T6). |
| Centre bore (CB) | 65.1 mm | Specific heavy-duty centre bore for commercial vehicles. |
| Wheel fastening type | M14 x 1.5 Ball Conical Bolts | Torque of 180 Nm recommended by Volkswagen Commercial Vehicles. |
| Minimum load capacity | 850 kg - 900 kg per wheel | Depending on registration weight class (T28, T30 or T32). |
| OEM wheel sizes | 6.5J x 16 ET51 / 7.0J x 17 ET55 / 8.0J x 18 ET50 | Factory steel and light alloy (e.g. Palmerston, Springfield, Valdivia). |
| OEM tyre sizes | 215/65 R16C / 235/55 R17 / 255/45 R18 XL | Must be fitted with C-coding (Commercial) or high XL Load Index (min. 103/105). |
Would you like to give your Transporter T6.1 an exclusive Bulli look or a wide stance with wheels from brands like Borbet Commercial (CW5/CWD), JR-Wheels (JR-X / SL01), Concaver, Veemann or Rotiform? Below you will find the ideal sizes for a scratch-free fit, including when lowered with Eibach or H&R lowering springs and coilovers.
| Wheel diameter (inch) | Recommended Rim Width (J) | Ideal ET Range | Recommended Tyre Size | Fitment Characteristic |
|---|---|---|---|---|
| 18 Inch (Comfort & Work) | 8.0J / 8.5J | ET45 - ET50 | 255/45 R18 (103 Y XL) | OEM+ look with excellent retention of ride comfort on poor roads. |
| 19 Inch (Balanced Sport) | 8.5J / 9.0J | ET42 - ET45 | 255/40 R19 (100 Y XL) | Nice fill of the wheel arch, sporty steering response for daily use. |
| 20 Inch (Ultimate Bulli Stance) | 8.5J / 9.0J (or 10.0J rear) | ET40 - ET45 | 275/35 R20 (102 Y XL) | The most popular size for the T6.1. Fills the arches tightly, scratch-free when lowered. |
Would you like to push the original 17" or 18" factory wheels further out to achieve a tighter fit in the wheel arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fit & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fit | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fit | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fit | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Fit | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fit (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fit (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.
In our webshop you can filter parts by Brand, Type, Version and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, sidebars/bullbars and exhaust systems have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are goods made to measure, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Version restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your VW Transporter T6.1 on grey registration, would you like advice on the mandatory load rating of wheels or would you like an all-in quote including workshop fitting in Nijkerk?