Model generation Type 960 (2013-2020) | 1.75 TBi Turbo (240 hp / 350 Nm) | Full Carbon Fibre Monocoque & Mid-Engine Staggered Setup

Why is correct wheel fitment crucial for the Alfa Romeo 4C & 4C Spider?
The Alfa Romeo 4C (Coupe and Spider Type 960, produced from 2013 to 2020 with an original new price of approximately € 65.000,- to € 69.500,-) is a unique Italian thoroughbred sports car. Thanks to an ultra-stiff carbon fiber monocoque weighing only 65 kg the whole car has a dry weight under 895 kg. Powered by the 240 HP 1.75-litre aluminium turbo engine behind the front seats and paired with the TCT dual-clutch transmission, the 4C accelerates to 100 km/u in 4.5 seconds. The 4C uses the 5x98 bolt pattern with a 58.1 mm centre bore and M12x1.25 wheel bolts. Crucial for the Alfa 4C is the Staggered (dual diameter) setup: the front and rear axles have different factory wheel and tyre sizes to maintain the balance of the mid-engine layout. Factory-fitted the 4C sits on 17"/18" (7.0J ET33 front & 8.0J ET44 rear) or the optional Pack Sport 18"/19" combination (7.0J ET33 front with 205/40 R18 & 8.5J ET44 rear with 235/35 R19 Pirelli P Zero AR tyres). When selecting aftermarket or trackday wheels (such as 18x7.5J front & 19x8.5J/9.0J rear from OZ Racing, Novitec or Pogea Racing) you must check that the spoke profile clears the red/black 4-piston Brembo calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Version, Year of Manufacture and chassis number.
The image below shows a high-quality light-alloy wheel specially designed for the Alfa Romeo 4C Spider:
The values below represent the original factory parameters of the Alfa Romeo 4C & 4C Spider (Type 960). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x98 | Classic Alfa Romeo 5-stud bolt circle on the 4C platform. |
| Centre bore (CB) | 58.1 mm | Standard Alfa Romeo centre bore. Hub rings required for wheels with a larger centre bore (e.g. 67.1 mm or 73.1 mm). |
| Wheel attachment type | M12 x 1.25 Conical Bolts | Torque of 98 Nm recommended by Alfa Romeo Corse. |
| OEM wheel sizes (17" Front / 18" Rear Standard) | 7.0J x 17 ET33 Front 8.0J x 18 ET44 Rear |
Factory 17/18 inch staggered 5‑stud wheels. |
| OEM wheel sizes (18" Front / 19" Rear Pack Sport) | 7.0J x 18 ET33 Front 8.5J x 19 ET44 Rear |
Factory 18/19 inch optional lightweight forged or cast wheels in Dark Grey. |
| OEM tyre sizes | 205/45 R17 Front & 235/40 R18 Rear (17/18") 205/40 R18 Front & 235/35 R19 Rear (18/19") |
Supplied on Pirelli P Zero AR (Alfa Romeo OEM spec) or Dunlop Sport Maxx Race. |
Do you want to equip your Alfa Romeo 4C or 4C Spider with a dedicated circuit/trackday wheelset, a more aggressive track width or weight savings through Flow Formed / Forged wheels from brands such as OZ Racing (Alleggerita HLT / Ultraleggera), 2Forged (ZF8-R in 5x98), Novitec, Pogea Racing, JR-Wheels, Akrapovič, Capristo, CSC or Maxton-styling? Below you will find the ideal sizes for a scratch-free fitment around the Brembo brakes and carbon fibre chassis components.
| Wheel diameter & construction | Position | Recommended wheel width (J) | Ideal ET value range | Recommended tyre size |
|---|---|---|---|---|
| 17" Front / 18" Rear (Lightweight Trackday / Circuit Sweet Spot) | Front Rear |
7.0J / 7.5J Front 8.0J / 8.5J Rear |
ET30 - ET33 ET38 - ET44 |
205/45 R17 Front 235/40 R18 Rear (Semi-slicks Nankang AR-1 / Cup 2) |
| 18" Front / 19" Rear (OEM+ Flush Fast Road Sweet Spot) | Front Rear |
7.5J Front 8.5J / 9.0J Rear |
ET30 - ET33 ET38 - ET42 |
215/40 R18 Front 245/35 R19 or 255/35 R19 Rear |
| 18" Front / 19" Rear (Aggressive Deep Stance Setup) | Front Rear |
8.0J Front 9.5J Rear |
ET28 - ET32 ET35 - ET38 |
215/40 R18 Front 255/35 R19 Rear (Light stretch on 9.5J) |
Do you want to push the original 17/18" or 18/19" 4C factory wheels (7.0J ET33 / 8.5J ET44) slightly further out to make them sit flush with the body hips?
In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT certainty.
In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW/Novitec, Akrapovi?/Novitec/CSC exhaust systems and bodykits from Maxton Design come with official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Alfa Romeo 4C or 4C Spider (Type 960 1.75 TBi 240 hp), would you like advice on 18"/19" staggered OZ Racing / Novitec / 2Forge wide sets or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?