Wheel Fitment Guide - Alpine A110

Wheels Fitment Guide - Alpine A110

Model generations A110 (2017-present) | Pure, Légende, GT (252 hp) & A110 S, A110 R, Turini (300 hp) | 1.8 TCe Mid-engine

Wheels Fitment Guide Alpine A110 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Alpine A110?
The Alpine A110 is an entirely unique lightweight sports car with a rear-mid mounted 1.8 TCe turbo engine and a full aluminium body. The car uses the bolt pattern 5x114.3 with a centre bore of 66.1 mm. To avoid spoiling the razor-sharp steering feel and weight distribution, Alpine equips the A110 with a specific staggered setup (7.5J ET29 front / 8.5J ET40 rear on 18 inch). Enthusiasts choosing an extra-wide trackday setup or lightweight Flow Formed wheels must use exact ET values to prevent rubbing on the double wishbone suspension and the 320 mm Brembo brakes. At Wheels 'N Customs in Nijkerk we check every order in advance based on your chosen Make, Model, Variant, Year and chassis number.

1. Factory specifications (OEM) Alpine A110

The values below represent the original factory parameters of the Alpine A110 (Pure, Légende, GT, S, R). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x114.3 Standard 5-lug bolt circle on the Alpine platform.
Centre bore (CB) 66.1 mm Specific centre bore. Hub rings required for wheels with a larger centre bore.
Wheel fastening type M12 x 1.5 Bolts Conical 60-degree seat. Tightening torque 110 Nm.
OEM Wheel sizes (17" Pure Base) Front: 7.0J x 17 ET29
\r\n Rear: 8.0J x 17 ET40
Factory 10-spoke lightweight wheels.
OEM Wheel Sizes (18" Legende / GT / S) Front: 7.5J x 18 ET29
Rear: 8.5J x 18 ET40
Factory Fuchs forged wheels, GT-Design or Grand Prix 18" wheels.
OEM Wheel Sizes (18" Carbon R / Turini) Front: 7.5J x 18 ET29
Rear: 8.5J x 18 ET40
Factory Duqueine Carbon Fibre or Turini forged wheels.
OEM Tyre Sizes (18") Front: 205/40 R18 (215/40 R18 on A110 S/R)
Rear: 235/40 R18 (245/40 R18 on A110 S/R)
Supplied on Michelin Pilot Sport 4 or Michelin Pilot Sport Cup 2 Connect.

2. Aftermarket Fitment Guide (18" & 19")

Would you like to equip your Alpine A110 with a tighter wheel tuck, a lightweight trackday setup or weight savings using Flow Formed / Forged wheels from brands like JR-Wheels (SL01), Motec, EVO Corse, OZ Racing, Apex or Maxton-styling? Below you’ll find the ideal sizes for scratch-free fitment, also when lowered with Eibach lowering springs or Öhlins coilovers.

Wheel Diameter & Construction Position Recommended Rim Width (J) Ideal ET Range Recommended Tyre Size
18 Inch (OEM+ Sweet Spot Track & Street) Front
Rear
7.5J / 8.0J
8.5J / 9.0J
ET25 - ET29
ET35 - ET40
215/40 R18
245/40 R18
18 Inch (Aggressive Trackday Cup Setup) Front
Rear
8.0J
9.0J / 9.5J
ET25
ET35 - ET38
225/40 R18 (Semi-slick)
255/40 R18 (Semi-slick)
19 Inch (Exclusive Show Stance Wide Set) Front
Rear
8.0J
9.0J
ET25 - ET28
ET35 - ET38
215/35 R19
245/35 R19

3. Wheel Spacers & Bolt Pattern Adapters for Alpine A110

Would you like to push the original 18" Fuchs or GT-design factory wheels (7.5J ET29 front / 8.5J ET40 rear) a little further outwards for a stronger hip line?

  • Spacers: On the original factory wheels H&R or Eibach spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 66.1 mm hub bore and extended M12x1.5 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Do you have an exclusive custom wheelset in mind with a different bolt pattern (e.g. 5x114.3 to 5x112)? Bolt pattern adapters accommodate this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total effective ET in advance to prevent the tyres from contacting the wheel arches during compression at high speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we mount wheels, exhaust systems, bodykits and suspensions daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Labour Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheelset Mounting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Brand, Type, Version and Year of manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are the wheels and parts we fit approved for the MOT?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Alpine A110 (Pure, Legende, GT, S or R), would you like advice on lightweight Flow Formed / Forged wheels or Brembo brake clearance, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl