Wheel Fitment Guide - Aston Martin Vantage V8 (AM6)

Wheels Fitment Guide - Aston Martin Vantage V8 (AM6)

Model generation AM6 Coupé & Roadster (2018-2024) | 4.0 V8 Twin-Turbo AMG (510 hp / 535 hp F1 Edition) | Transaxle Widebody Brembo/CCB

Wheels Fitment Guide Aston Martin Vantage V8 AM6 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Aston Martin Vantage V8 (AM6)?
The Aston Martin Vantage V8 (Generation AM6, produced from 2018 to 2024) is a pure-bred British sports car with an aggressive design. Powered by the 510 HP (or 535 HP on the F1 Edition) and 685 Nm 4.0‑litre V8 Twin‑Turbo engine from AMG with a transaxle 8‑speed ZF automatic on the rear axle, the Vantage places strict demands on wheel specifications. Unlike German sports cars, Aston Martin uses the Japanese/British bolt pattern 5x114.3 on the AM6 platform with a 68.1 mm centre bore and M14x1.5 wheel bolts. Factory fitment for the Vantage V8 is staggered: 20 inch (9.0J ET48 with 255/40 ZR20 tyres) at the front and 20 inch (11.0J ET54 with 295/35 ZR20 tyres) at the rear, or optionally 21 inch wheels on the F1 Edition. For aftermarket wheels (such as 9.5J and 11.5J Custom Forged in 20 or 21 inch) sufficient spoke clearance around the 400 mm steel brakes or optional 400 mm Carbon Ceramic Matrix (CCBM) discs with 6‑piston calipers is essential. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Aston Martin Vantage V8 AM6

The values below represent the original factory parameters of the Aston Martin Vantage V8 (AM6). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
P.C.D. (Pitch Circle Diameter) 5x114.3 Unique 5-bolt PCD on the aluminium AM6 platform.
Centre Bore (CB) 68.1 mm Specific Aston Martin hub bore. Centre rings are required for wheels with a larger hub bore (e.g. 73.1 mm).
Wheel Fastening Type M14 x 1.5 Conical Bolts 150 Nm tightening torque recommended by Aston Martin.
OEM Wheel Sizes (20" Standard Forged / Cast) Front: 9.0J x 20 ET48
Rear: 11.0J x 20 ET54
Factory 10-spoke or Y-spoke alloy wheels in Gloss Black, Silver or Diamond Turned.
OEM Wheel Sizes (21" F1 Edition Forged) Front: 9.5J x 21 ET48
Rear: 11.5J x 21 ET54
Factory 21-inch forged wheels made for the F1 Edition in Satin Black or Satin Black Diamond Turned.
OEM Tyre Sizes Front: 255/40 ZR20 (255/35 ZR21 on 21")
Rear: 295/35 ZR20 (295/30 ZR21 on 21")
Supplied on Pirelli P Zero (A6A Aston Martin OEM spec) with XL Load Index.

2. Aftermarket Fitment Guide (20" & 21" Vantage AM6)

Do you want to give your Aston Martin Vantage V8 an even tighter fitment of the wide hips, deeper concavity or weight savings with Custom Forged wheels from brands like BC Forged, Brixton Forged, HRE, Vossen, Rotiform, Custom Forged or Maxton-styling? Below are the ideal sizes for a scratch-free fitment, including when lowered with Eibach, H&R or KW coilover kits.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
20 Inch (OEM+ Flush Street Setup) Front
Rear
9.0J / 9.5J
11.0J / 11.5J
ET38 - ET44
ET44 - ET50
255/40 R20 (or 265/35 R20)
295/35 R20 (or 305/35 R20)
21 Inch (Absolute Sweet Spot Supercar Stance) Front
Rear
9.5J
11.5J
ET38 - ET42
ET44 - ET48
255/35 R21 (or 265/35 R21)
295/30 R21 (or 305/30 R21)
21 Inch (Aggressive Deep Concave Show Wide Setup) Front
Rear
9.5J / 10.0J
12.0J
ET35 - ET40
ET40 - ET45
265/35 R21
325/30 R21

3. Wheel Spacers & Fitment Determinations for Vantage AM6

Do you want to push the original 20" or 21" factory wheels (9.0J ET48 front / 11.0J ET54 rear) slightly further out to sit flush with the arches?

  • Wheel Spacers: On the original factory wheels H&R or Hill Power spacers from 12 mm to 15 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 5x114.3 PCD and 68.1 mm hub fitment and extended M14x1.5 wheel bolts.
  • Brake Caliper Clearance & Camber: As the Vantage V8 can be optionally equipped with 400 mm Carbon Ceramic Matrix brakes with large 6-piston calipers, the inner barrel and spoke profile of the wheel must be digitally checked in advance for bespoke (Custom Forged) wheels.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Item / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Installation € 80 - € 120 45 - 60 minutes
Side Skirts Set Installation € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tailpipe (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with our own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and MOT compliance.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Brand, Type, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order, our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Capristo/Akrapovi?/Quicksilver exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Aston Martin Vantage V8 (AM6), would you like advice on 400mm Carbon Ceramic brake clearance or 5x114.3 Custom Forged wheels, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl