Wheels Fitment Guide: Audi A3 / S3 / RS3 8V (2012-2020)
Why is accurate fitment so important on the Audi 8V?
The Audi A3, S3 and RS3 of the 8V generation ride on the MQB platform. This chassis is very sensitive to chosen ET and wheel width. A too low ET (wheels pushed too far out) causes contact with the plastic inner wheelarch liners or the arch lip when compressing, while on the S3 and RS3 you also need to account for the large front brake calipers (brake clearance).
1. Original Factory Specifications (OEM Fits)
The OEM data below applies to factory versions of the Audi A3 8V, S3 8V and RS3 8V (3-door, Sportback and Saloon):
| Specification |
Factory Value (OEM) |
Expert Note |
| Bolt Pattern (PCD) |
5x112 |
Standard VAG 5-lug bolt pattern. |
| Centre Bore (CB) |
57.1 mm |
Same across all A3/S3/RS3 8V models; centre rings required for wheels with a larger bore (e.g. 66.5 mm). |
| OEM Wheel Sizes |
16 to 19 Inch |
16"-17" (A3 standard/winter), 18" (S-Line / S3), 19" (S3 / RS3 optional). |
| OEM ET Range |
ET46 - ET51 |
High OEM ETs keep the wheel well tucked deep inside the arches. |
| Wheel Fasteners |
M14 x 1.5 Ball Conical (R13) |
OEM bolts are ball-conical. Aftermarket wheels usually require 60° conical bolts! |
| Tightening Torque |
120 Nm |
Tighten to specification with a calibrated torque wrench. |
2. Aftermarket Fitment Guide (What fits safely?)
Want the wheel to sit tighter in the arch ('flush fitment') without the tyres rubbing on compression? See the recommended aftermarket sizes:
| Size |
Wheel Width (J) |
Ideal ET |
Recommended Tyre Size |
Fitment Character |
| 18 Inch |
18x8.0J / 18x8.5J |
ET42 - ET45 |
225/40 R18 |
Excellent comfort, direct steering feel, ideal for daily use and winter sets. |
| 19 Inch |
19x8.5J |
ET42 - ET45 |
235/35 R19 |
Most chosen fitment! Fill the wheel arch beautifully, no rubbing risk with standard or sport suspension. |
| 20 Inch |
20x8.5J |
ET45 |
235/30 R20 |
Extremely clean appearance (stance look). Requires precise setup with significant lowering. |
3. Wheel spacers, PCD adapters & Lowering advice
Achieving a tight look and improved handling often requires a combination of the correct track width and a lowered centre of gravity.
- Wheel spacers (Spacers): Are you running original Audi OEM wheels (ET49 - ET51)? With spacers of 10 mm per side (front) and 12 mm to 15 mm per side (rear) you bring the wheels nicely level with the body. Always use spacers with an integrated hub centring lip and the corresponding extended wheel bolts.
- Lowering (Lowering springs & Coilover kits): With a lowering kit from Eibach, H&R or KW (25 to 40 mm) a setup of 19x8.5J ET45 will clear the arches without issue. With extreme lowering using a coilover kit it is advised not to choose an ET lower than ET45 to avoid contact during sharp steering input.
- PCD adapters & Bolt pattern change: Want to fit wheels with a different bolt pattern (like 5x120 or 5x112 to 5x100)? With quality PCD adapters the bolt pattern can be converted. Keep in mind a minimum adapter thickness of 15 mm, which effectively reduces the wheel’s ET by 15.
4. Frequently Asked Questions (FAQ)
Do 19 inch wheels rub on a lowered Audi A3 or S3 8V?
No, provided you choose the recommended sizing of 19x8.5J with an ET between ET42 and ET45 combined with 235/35 R19 tyres. With heavy lowering (more than 40 mm) the plastic lip at the top of the front wheel arch can touch under hard compression in fast corners. This is easily resolved by removing the screw and folding the lip back (the so-called 'fender screw mod').
Do all 18 and 19 inch wheels fit on the Audi S3 and RS3 8V because of the brakes?
No. Both the S3 and especially the RS3 have significantly larger front brake calipers than a regular Audi A3. Not only ET and wheel width matter, but also the design and curvature of the spokes (brake clearance). If in doubt, always ask the specialists at Wheels 'N Customs for guaranteed-fitting wheel sets.
Do I need hub centring rings on my Audi A3 / S3 8V?
You need hub centring rings if the aftermarket wheel’s centre bore is larger than the original Audi hub diameter of 57.1 mm (for example wheels with a universal centre bore of 66.5 mm or 73.1 mm). The centre ring precisely centres the wheel on the hub to prevent steering wheel vibrations at higher speeds.
Expert Fitment Advice For Your Audi
Want to know which wheel set, spacers or lowering kit best suits your Audi A3, S3 or RS3? Contact the experts at Wheels 'N Customs in Nijkerk or view our extensive range online.
Ask Our Experts For Advice