Model generations e-tron GT Quattro & RS e-tron GT (2021-present) | Power: 476 hp to 646 hp (Launch Control) | J1 EV Performance Platform
Why is correct wheel fitment crucial for the Audi e-tron GT & RS e-tron GT?
The Audi e-tron GT (and the top-spec RS e-tron GT) is the electric flagship of Audi Sport. Built on the high-performance J1 EV platform, this Gran Turismo combines lightning-fast acceleration with an unladen weight of well over 2,300 kg. This requires wheels with an extreme certified load capacity (minimum 850 kg to 950 kg per wheel). The car uses wide rear wheels from the factory (up to 11.5J) on the familiar 5x130 bolt pattern with a 71.6 mm centre bore. In addition, aftermarket wheels must be aerodynamically efficient and provide sufficient clearance for the optional 410 mm Tungsten Carbide or 420 mm RS Ceramic 10-piston brakes. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Audi e-tron GT and RS e-tron GT. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt Pattern (PCD) | 5x130 | J1-platform bolt circle (note: different from the standard Audi 5x112 size). |
| Centre Bore (CB) | 71.6 mm | J1 centre bore. Hub rings required for larger wheel centre holes. |
| Type of Wheel Fastening | M14 x 1.5 Ball Conical Bolts | Torque of 160 Nm recommended by Audi Sport. |
| Minimum Load Capacity | 850 kg - 950 kg per wheel | Required due to the high unladen weight (2,350 kg) and instant torque delivery. |
| OEM Wheel Sizes (20" Wide Set) | Front: 9.0J x 20 ET54 Rear: 11.0J x 20 ET60 |
Factory 5-double-spoke or Aero forged wheels. |
| OEM Wheel Sizes (21" Wide Set) | Front: 9.5J x 21 ET60 Rear: 11.5J x 21 ET66 |
Factory 10-spoke or RS concave wheels. |
| OEM Tyre Sizes | Front: 245/45 R20 (265/35 R21) Rear: 285/40 R20 (305/30 R21) |
Must be marked XL (Extra Load) and suitable for EV use. |
Would you like to fit your Audi e-tron GT or RS e-tron GT with a deeper concave or custom forged wheels from A-brands such as Concaver, Rotiform, Vossen, HRE, Brixton Forged or Prior/Maxton styling? Below are the ideal sizes for scratch-free fitment, also when lowering using the Adaptive Air Suspension.
| Wheel diameter & Construction | Position | Recommended Wheel Width (J) | Ideal ET Value Range | Recommended Tyre Size |
|---|---|---|---|---|
| 20 Inch (OEM+ Comfort Wide Set) | Front Rear |
9.0J 11.0J |
ET48 - ET52 ET55 - ET58 |
245/45 R20 285/40 R20 |
| 21 Inch (Sweet Spot RS Sport Wide Set) | Front Rear |
9.5J 11.5J |
ET50 - ET55 ET58 - ET62 |
265/35 R21 305/30 R21 |
| 22 Inch (Exclusive Show Stance Wide Set) | Front Rear |
9.5J / 10.0J 11.5J / 12.0J |
ET50 ET58 - ET60 |
265/30 R22 315/25 R22 |
Do you want to push the original 20" or 21" factory wheels (9.5J ET60 front / 11.5J ET66 rear) slightly further out to make them flush with the fender edges?
In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Component / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheelset Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Vans / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Vans / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and APK (MOT) certainty.
In our webshop you filter parts by Brand, Type, Trim and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 or 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all of our alloy wheels, lowering kits from Eibach/H&R/KW and bodykits have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Trim restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi e-tron GT or RS e-tron GT, would you like advice on EV load capacity/range or ceramic brake clearance, or would you like an all-in quote including workshop fitting in Nijkerk?