Wheel Fitment Guide - Audi RS Q8 Performance (4M.5 Facelift)

Wheels Fitment Guide - Audi RS Q8 Performance (4M.5 Facelift)

Model generation 4M.5 Facelift Performance SUV (2024-present) | 4.0 V8 TFSI BiTurbo (640 hp / 850 Nm) | Quattro Widebody RS Ceramic

Wheels Fitment Guide Audi RS Q8 Performance 4M.5 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS Q8 Performance (4M.5 Facelift)?
The Audi RS Q8 Performance (Facelift Generation 4M.5) represents the absolute flagship of Audi Sport in the SUV segment. With an overwhelming power output of 640 HP and 850 Nm torque from the 4.0‑litre BiTurbo V8, the RS Q8 Performance reclaimed the Nürburgring Nordschleife SUV lap record. The car features a pronounced wide RS body with accentuated wheel arch extensions. Built on the MLB‑Evo platform the RS Q8 Performance uses the bolt pattern 5x112 with a 66.5 mm centre bore and M14x1.5 wheel bolts. From factory the RS Q8 Performance rides on colossal 22 inch wheels (10.0J ET21) or the optional 23 inch lightweight forged wheels (10.5J ET18 with 295/35 R23 tyres all round). Because the Performance version is standard equipped with solid 440 mm RS Ceramic Carbon discs with 10‑piston calipers at the front, it places extreme demands on spoke and barrel clearance of aftermarket wheels. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Audi RS Q8 Performance (4M.5)

The values below represent the original factory parameters of the Audi RS Q8 Performance (4M.5 Facelift). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory Value (OEM) Notes & Advice
Bolt Pattern (PCD) 5x112 Standard VAG 5-bolt circle on the MLB-Evo platform.
Hub Bore (CB) 66.5 mm Large VAG MLB-Evo hub bore. Centreing rings are needed for wheels with a larger hub bore (e.g. 73.1 mm).
Wheel Fastening Type M14 x 1.5 Ball Conical Bolts Torque of 160 Nm recommended by Audi Sport.
OEM Wheel Sizes (22" Standard RS Performance) 10.0J x 22 ET21 Factory 10-spoke Y-design silver or two-tone alloy wheels in a square layout.
OEM Wheel Sizes (23" Option Lightweight Forged) 10.5J x 23 ET18 Factory 23 inch forged lightweight wheels in Neodyme Gold, Silk Matte Black or Gloss Metallic.
OEM Tyre Sizes 295\/40 R22 (on 22") \/ 295\/35 R23 (on 23") Supplied on Continental SportContact 7, Pirelli P Zero Corsa or Hankook Ventus S1 evo3 SUV with XL load index and RO1 (Audi Sport spec).

2. Aftermarket Fitment Guide (22" & 23")

Do you want to give your Audi RS Q8 Performance 4M.5 a tighter fill of the SUV wheelarches, deeper concavity or weight savings with custom forged wheels from brands like Concaver, JR-Wheels, Rotiform, Veemann, Vossen, ABT Sportsline, Urban Automotive, BC Forged or Maxton-styling? Below are the ideal sizes for a scratch-free fit, also for cars with RS-adaptive air suspension sport.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
22 Inch (OEM+ Winter \/ Performance Setup) Front & Rear (Square) 10.0J / 10.5J ET15 - ET20 295/40 R22
23 Inch (Absolute Sweet Spot Street Performance) Front & Rear (Square) 10.5J / 11.0J ET12 - ET18 295\/35 R23 (or 305\/35 R23)
23 Inch (Aggressive Deep Concave Show Stance) Front & Rear (Square) 11.0J / 11.5J ET10 - ET15 295\/35 R23 (Light stretch on 11.5J) or 305\/35 R23

3. Wheel Spacers & Bolt Pattern Adapters for Audi RS Q8 Performance

Do you want to push the original 22" or 23" RS factory wheels (10.5J ET18 on 23 inch forged) further out to make them sit flush with the wide arches?

  • Spacers: On the original 10.5J ET18 factory wheels H&R or Eibach spacers from 12 mm to 15 mm can be fitted at the front and 15 mm to 18 mm at the rear. Use only hub-centric aluminium spacers with the specific 66.5 mm hub fitment and extended M14x1.5 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Do you have an exclusive custom wheelset in mind with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt pattern adapters solve this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total ET in advance to prevent wide tyres contacting the arch liners when compressing at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part \/ Labour Labour Rate (Excl. VAT) Indicative Labour Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Splitter \/ Bumper Lip \/ Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Trunk Spoiler Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tip (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fit guarantee, factory warranty and MOT assurance.

How does Wheels 'N Customs' vehicle inspection and fit guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/ABT exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact / Request Advice

Do you have specific questions about the exact fitment for your Audi RS Q8 Performance (4M.5 Facelift), would you like advice about 440mm RS Ceramic caliper clearance or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl