Wheel Fitment Guide: Audi RS3 8V / 8Y | Wheels 'N Customs

The Ultimate Wheel Fitment Guide: Audi RS3 8V / 8Y

Finding the right wheels for the Audi RS3 (8V & 8Y) is a challenge because of the massive 8-piston (or ceramic) brake calipers and the factory characteristics. The specialists at Wheels 'N Customs explain exactly which wheels fit.

Direct answer (TL;DR):
\r\nThe Audi RS3 uses the well-known 5x112 bolt pattern with a 57.1 mm centre bore. For a 'Square' setup (4 identical wheels allowing rotation) we recommend 19x8.5J ET42 to ET45 with 235\/35\/19 tyres all round.

1. Original Factory Specifications (OEM)

The RS3 8V and 8Y have very specific offset values from the factory to fill the wide front arches.

Specification Audi RS3 Dimensions
Bolt Pattern (PCD) 5x112
Centre Bore 57.1 mm
Thread Size (Mounting) Bolt: M14 x 1.5 (Torque 120 Nm)
Factory Setup (Reverse Staggered) Front: 19x8.5J ET46 (250\/30\/19) | Rear: 19x8.0J ET42 (235\/35\/19)

2. Aftermarket Fitment Options (Square vs Reverse)

Many owners switch to a 'Square' setup for easier tyre maintenance and a larger selection of aftermarket wheels.

Fitment Type Wheel Size Front / Rear Ideal ET Value Tyre Size
Square (Same All Round / Practical) 19x8.5J All Round ET 42 - ET 45 235\/35\/R19 All Round
Reverse Staggered (Performance) 19x9.0J (V) / 19x8.5J (A) ET 42 (F) / ET 42 (R) 255/30/R19 (V) / 235/35/R19 (A)
Aggressive Track (Requires Camber) 19x9.0J All Round ET 40 - ET 42 245\/35\/R19 All Round

3. What to Watch For? (Expert Tips)

  • Spoke Clearance / X-Factor: The RS3 has very large front brake calipers. Not every wheel with the right ET will fit! The spokes must have a pronounced bulge (high-dish) to avoid contacting the brake caliper.
  • Magnetic Ride / RS Sport Suspension: When lowering we recommend H&R sport springs (25mm) or the KW V3 Clubsport coilover kit with adjustable Unibal top mounts for the necessary negative camber.

4. Frequently Asked Questions (FAQ)

Can I mount a standard A3/S3 wheel on an RS3?

Usually not. Although the bolt pattern (5x112) and centre bore (57.1mm) are the same, standard A3/S3 wheels almost always foul the huge front brake calipers of the RS3.

Do I need hub centric rings?

Aftermarket wheels (like Rotiform, JR or Motec) often have a centre bore of 66.6 mm or 72.6 mm. So you will need hub centric rings down to 57.1 mm. These are supplied free of charge with a complete wheel set by Wheels 'N Customs.

Request a Fitment Check

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl