Model generation 8P Sportback (2011-2012) | 2.5 20V TFSI 5-Cylinder Turbo (340 hp / 450 Nm) | Quattro Carbon Composite Widebody

Why is correct wheel fitment crucial for the Audi RS3 Sportback (8P)?
The Audi RS3 Sportback (Generation 8P) unleashed a true revolution when introduced in 2011. Powered by the famed 340 HP 2.5-litre 5-cylinder turbo engine with Quattro all-wheel drive, the 8P RS3 features unique front wings made from lightweight Carbon Fiber Reinforced Plastic (CFRP). The car uses the familiar VAG bolt pattern 5x112 with a 57.1 mm centre bore and M14x1.5 wheel bolts. Factory-fitted the RS3 8P sits on a very specific 'Reverse Staggered' setup: 19 inch (8.0J ET50 all around with 235/35 R19 front and 225/35 R19 rear, or optional 8.5J ET50 front wheels). When selecting aftermarket wheels (such as 8.5J ET42-ET45 on 18 or 19 inch) sufficient spoke clearance around the massive 370 mm 4-piston RS calipers is essential. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Audi RS3 Sportback (8P). Use these as technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5-lug bolt circle on the PQ35 platform. |
| Centre bore (CB) | 57.1 mm | Known VAG PQ35 hub bore. Centre rings required for wheels with a larger hub diameter (e.g. 66.6 mm or 73.1 mm). |
| Wheel Fastening Type | M14 x 1.5 Ball Conical Bolts | Tightening torque of 120 Nm recommended by Audi Sport. |
| OEM Wheel Sizes (19" Standard RS Rotor) | Front: 8.0J x 19 ET50 (or optionally 8.5J ET50) Rear: 8.0J x 19 ET50 |
Factory 5‑arm Rotor alloy wheels in silver/anthracite or black with red rim. |
| OEM Tyre Sizes (Reverse Staggered) | Front: 235/35 R19 Rear: 225/35 R19 (or 235/35 R19 Square) |
Supplied on Pirelli P Zero with XL Load Index and RO1 (Audi Sport spec). |
Do you want to give your Audi RS3 Sportback 8P a tighter wheel‑arch fill, a sportier stance or weight savings with Flow Formed / Custom Forged wheels from brands such as JR‑Wheels (SL01 / JR11 / JR30), Concaver, Motec, Autec, Borbet, Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton‑styling? Below you’ll find the ideal sizes for a scratch‑free fit, also when lowered with Eibach, H&R or KW coilovers.
| Wheel Diameter & Construction | Position | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size |
|---|---|---|---|---|
| 18 Inch (Trackday / Winter Performance Setup) | Front & Rear (Square) | 8.0J / 8.5J | ET42 - ET45 | 225/40 R18 (or 235/40 R18) |
| 19 Inch (OEM+ Flush Street Performance Sweet Spot) | Front & Rear (Square) | 8.5J | ET42 - ET48 | 235/35 R19 |
| 19 Inch (Reverse Staggered Aftermarket Setup) | Front Rear |
8.5J 8.0J / 8.5J |
ET42 - ET45 ET45 - ET48 |
235/35 R19 225/35 R19 |
Do you want to push the original 19" RS‑Rotor factory wheels (8.0J ET50) slightly further out to make them sit flush with the fenders?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Fitment Time |
|---|---|---|
| Complete Wheelset Mounting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Splitter / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle‑back / Cat‑back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you filter parts by Brand, Type, Specification and Year of Manufacture (we consciously do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/Akrapovi? exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a trouble-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi RS3 Sportback (8P 2.5T), would you like advice on Reverse Staggered wide sets or track wideners, or would you like an all-in quote including workshop fitting in Nijkerk?