Wheel Fitment Guide - Audi RS3 Sportback & Saloon (8V.1 2.5 TFSI 367 hp)

Wheel Fitment Guide - Audi RS3 Sportback & Saloon (8V.1 2.5 TFSI 367 hp)

Model generation 8V.1 Pre-Facelift (2015-2017) | 2.5 20V TFSI 5-Cylinder Turbo (367 hp / 465 Nm) | Quattro MQB Platform

Wheel Fitment Guide Audi RS3 8V1 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS3 (8V.1 Pre-Facelift)?
The Audi RS3 (Generation 8V.1 Pre-Facelift, produced from 2015 to 2017) brought the iconic 5-cylinder turbo sound to the modern MQB platform. Powered by the 367 HP and 465 Nm 2.5-litre TFSI engine and paired with the S Tronic 7-speed automatic and Quattro four-wheel drive, the 8V.1 RS3 places specific demands on wheel sizes and brake clearance. The car uses the familiar VAG bolt pattern 5x112 with a 57.1 mm centre bore and M14x1.5 wheel bolts. Factory-fitted, the RS3 8V.1 runs a Square 19 inch setup (8.0J ET49 with 235/35 R19 tyres) or the optional 'Reverse Staggered' setup (8.5J ET53 with 255/30 R19 tyres FRONT and 8.0J ET49 with 235/35 R19 tyres REAR). When selecting aftermarket wheels (such as 8.5J ET42-ET45 on 19 inch) sufficient spoke clearance around the large 370 mm 8-piston RS Wave calipers is essential. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Specification, Year of manufacture and chassis number.

1. Factory specifications (OEM) Audi RS3 8V.1 Pre-Facelift

The values below represent the original factory parameters of the Audi RS3 (8V.1 Pre-Facelift). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 Standard VAG 5-lug bolt pattern on the MQB platform.
Hub bore (CB) 57.1 mm Common VAG MQB hub bore. Use centring rings for wheels with a larger hub bore (e.g. 66.6 mm or 73.1 mm).
Wheel fastener type M14 x 1.5 Ball-conical Bolts 120 Nm tightening torque recommended by Audi Sport.
OEM Wheel Sizes (19" Standard Square Rotor) 8.0J x 19 ET49 (Front & Rear) Factory 5-arm Rotor alloy wheels in silver, matte titanium or gloss black.
OEM Wheel Sizes (19" Reverse Staggered Option) Front: 8.5J x 19 ET53
\r\n\t\t\tRear: 8.0J x 19 ET49
Factory optional wider front wheels to reduce understeer on track.
OEM Tyre Sizes 235/35 R19 (Square) or 255/30 R19 Front & 235/35 R19 Rear Supplied on Continental SportContact 5P, Pirelli P Zero or Michelin Pilot Super Sport with XL load index and RO1 (Audi Sport spec).

2. Aftermarket Fitment Guide (18" & 19")

Do you want to give your Audi RS3 8V.1 a tighter wheel fitment, a sportier stance or weight savings with Flow Formed / Custom Forged wheels from brands like JR-Wheels (SL01 / JR11 / JR30), Concaver, Motec, Autec, Borbet, Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton-styling? Below are the ideal sizes for scratch-free fitment, even when lowered with Eibach, H&R or KW coilovers.

Wheel diameter & construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
18 Inch (Trackday / Winter Performance Setup) Front & Rear (Square) 8.0J / 8.5J ET42 - ET45 225/40 R18 (or 235/40 R18)
19 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 8.5J ET42 - ET45 235/35 R19
19 Inch (Reverse Staggered Aftermarket Setup) Front
\r\n\t\t\tRear
8.5J / 9.0J
8.5J
ET42 - ET45
\r\n\t\t\tET45 - ET48
255/30 R19
235/35 R19

3. Wheel Spacers & Bolt Pattern Adapters for Audi RS3 8V.1

Want to push the original 19" RS-Rotor factory wheels (8.0J ET49) slightly further out to make them sit flush with the arches?

  • Wheel Spacers: On the original 8.0J ET49 factory wheels you can fit H&R or Eibach spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear. Use only hub-centred aluminium spacers with the specific 57.1 mm hub fitment and extended M14x1.5 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Do you have an exclusive custom wheelset in mind with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt pattern adapters accommodate this, but require a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total effective ET in advance to prevent the tyres from contacting the arch edges under compression at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and check the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does the vehicle inspection and fitment guarantee from Wheels 'N Customs work?

In our webshop you filter parts by Brand, Type, Version and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/Akrapovi? exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free MOT inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior checking of Brand/Type/Version restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi RS3 (8V.1 Pre-Facelift 367 hp), would you like advice on Reverse Staggered wide sets or track wideners, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl