Wheel Fitment Guide - Audi RS3 Sportback & Saloon (8V.2 Facelift 2.5 TFSI 400 hp)

Wheels Fitment Guide - Audi RS3 Sportback & Saloon (8V.2 Facelift 2.5 TFSI 400 hp)

Model generation 8V.2 Facelift Sportback & Saloon (2017-2020) | 2.5 20V TFSI 5-cylinder Aluminium Block DAZA / DNWA (400 hp / 480 Nm) | Quattro MQB Widebody

Wheels Fitment Guide Audi RS3 8V2 Facelift Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS3 (8V.2 Facelift 400 hp)?
The Audi RS3 (Generation 8V.2 Facelift, produced from 2017 to 2020 in both Sportback and, for the first time, Saloon body styles) is an absolute legend thanks to the lightweight aluminium 2.5 TFSI 5-cylinder engine (engine code DAZA and the later DNWA with OPF). Driven by 400 hp and 480 Nm torque with the S Tronic 7-speed automatic and Quattro four-wheel drive, the 8V.2 RS3 places specific demands on wheel and tyre sizes. The car uses the VAG bolt pattern 5x112 with a 57.1 mm centre bore and M14x1.5 wheel bolts. Factory specification for the RS3 8V.2 is a 19-inch Square setup (8.0J ET49 with 235/35 R19 tyres) or the famed optional 'Reverse Staggered' setup (8.5J ET53 with 255/30 R19 tyres FRONT and 8.0J ET49 with 235/35 R19 tyres REAR). When selecting aftermarket wheels (such as 8.5J ET42-ET45 on 19 inch) adequate spoke clearance around the 370 mm RS Wave brakes or optional 380 mm RS Ceramic Carbon discs is essential. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Audi RS3 8V.2 Facelift (400 hp)

The values below represent the original factory parameters of the Audi RS3 (8V.2 Facelift Sportback & Saloon). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 Standard VAG 5-stud bolt circle on the MQB platform.
Centre bore (CB) 57.1 mm Known VAG MQB hub bore. Centre rings required for wheels with a larger centre bore (e.g. 66.6 mm or 73.1 mm).
Wheel fastener type M14 x 1.5 Ball Conical Bolts 120 Nm torque recommended by Audi Sport.
OEM Wheel sizes (19" Standard Square Blade / Rotor) 8.0J x 19 ET49 (Front & Rear) Factory 5-arm Blade or 5-arm Rotor II alloy wheels in silver, matte titanium or gloss black.
OEM Wheel sizes (19" Reverse Staggered Option) Front: 8.5J x 19 ET53
Rear: 8.0J x 19 ET49
Factory optional wider front wheels to reduce understeer on track days.
OEM Tyre sizes 235/35 R19 (Square) or 255/30 R19 Front & 235/35 R19 Rear Supplied on Continental SportContact 6, Pirelli P Zero or Michelin Pilot Sport 4S with XL load index and RO1 (Audi Sport spec).

2. Aftermarket Fitment Guide (18" & 19")

Do you want to give your Audi RS3 8V.2 Facelift an even tighter wheel tuck, a sportier stance or save weight with Flow Formed / Custom Forged wheels from brands like JR-Wheels (SL01 / JR11 / JR30), Concaver, Motec, Autec, Borbet, Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton-styling? Below are the ideal sizes for scratch-free fitment, also when lowering with Eibach, H&R or KW coilovers.

Wheel diameter & construction Position Recommended rim width (J) Ideal ET value range Recommended tyre size
18 Inch (Trackday / Winter Performance Setup) Front & Rear (Square) 8.0J / 8.5J ET42 - ET45 225/40 R18 (or 235/40 R18)
19 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 8.5J ET42 - ET45 235/35 R19
19 Inch (Reverse Staggered Aftermarket Setup) Front
Rear
8.5J / 9.0J
8.5J
ET42 - ET45
ET45 - ET48
255/30 R19
235/35 R19

3. Wheel spacers & hub adapters for Audi RS3 8V.2

Do you want to push the original 19" RS-Blade factory wheels (8.0J ET49) slightly further out to make them sit flush with the arches?

  • Wheel spacers: On the original 8.0J ET49 factory wheels, H&R or Eibach spacers of 10 mm to 12 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 57.1 mm hub fitment and extended M14x1.5 wheel bolts.
  • Hub adapters & fitment check: Are you looking at an exclusive custom wheelset with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt pattern adapters accommodate this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total effective ET in advance to prevent the tyres contacting the wheel arches when compressing at speed.

4. Fixed labour rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspensions to 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Component / Labour Labour rate (Excl. VAT) Indicative fitment time
Complete wheel set fitting & balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tailpipe (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with our own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and APK-certainty.

How does the vehicle inspection and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Brand, Type, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you, within 48 hours via WhatsApp or e-mail, for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/Akrapovi? exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free APK inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi RS3 (8V.2 Facelift 400 hp), would you like advice on RS Ceramic caliper clearance or Reverse Staggered wide sets, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl