Wheel Fitment Guide - Audi RS3 Performance Edition (8Y 2.5 TFSI 407 hp)

Wheels Fitment Guide - Audi RS3 Performance Edition (8Y 2.5 TFSI 407 hp)

Model generation 8Y Limited (2023‑present, 300 units) | 2.5 20V TFSI 5‑Cylinder Turbo (407 hp / 500 Nm) | RS Torque Splitter & RS Ceramic Brakes

Wheels Fitment Guide Audi RS3 Performance Edition 8Y Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS3 Performance Edition (8Y)?
The Audi RS3 Performance Edition (Generation 8Y, globally limited to exactly 300 units) is the fastest and most powerful factory RS3 ever made, with a top speed of no less than 300 km/h. Powered by the uprated 407 HP and 500 Nm 2.5‑litre 5‑cylinder turbo engine with RS Torque Splitter rear differential, this limited series places extremely high demands on wheel and tyre sizes. The car uses the VAG bolt pattern 5x112 with a 57.1 mm centre bore and M14x1.5 wheel bolts. Factory‑spec for the RS3 Performance Edition is a striking Reverse Staggered setup with motorsport 10‑spoke forged wheels: 9.0J ET25 at the front (with 263/30 R19 Pirelli P Zero Trofeo R semi‑slicks) and 8.0J ET46 at the rear (with 245/35 R19 tyres). Because the Performance Edition is standard‑equipped with solid 380 mm RS Ceramic Brakes with 6‑piston calipers at the front, spoke and barrel clearance is of primary importance when purchasing aftermarket or trackday wheels. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Brand, Model, Variant, Year and chassis number.

1. Factory specifications (OEM) Audi RS3 Performance Edition 8Y

The values below represent the original factory parameters of the Audi RS3 Performance Edition (8Y). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 Standard VAG 5-lug bolt circle on the MQB-Evo platform.
Centre bore (CB) 57.1 mm Known VAG MQB centre bore. Hub-centric rings required for wheels with a larger centre bore (e.g. 66.6 mm or 73.1 mm).
Wheel fastening type M14 x 1.5 Ball-conical Bolts 120 Nm torque recommended by Audi Sport.
OEM wheel sizes (19" Reverse Staggered Performance) Front: 9.0J x 19 ET25
Rear: 8.0J x 19 ET46
Factory 10-spoke motorsport forged alloy wheels in Dark Matte Grey or Black.
OEM tyre sizes Front: 263\/30 R19 (Pirelli Trofeo R)
Rear: 245\/35 R19
Supplied on Michelin Pilot Sport Cup 2 or Pirelli P Zero Trofeo R semi-slicks with XL load index and RO1\/RO2 (Audi Sport spec).

2. Aftermarket fitment guide (19" RS3 Performance)

Do you want to give your Audi RS3 Performance Edition 8Y a tighter wheel tuck, a spare wheel set or weight savings with Flow Formed / Custom Forged wheels from brands like JR-Wheels (SL01 / JR11 / JR30), Concaver, Motec, Autec, Borbet, Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton-styling? Below are the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.

Wheel diameter & construction Position Recommended rim width (J) Ideal ET value range Recommended tyre size
19 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 8.5J / 9.0J ET25 - ET30 (Front) \/ ET42 - ET46 (Rear) 265\/30 R19 (Front) & 245\/35 R19 (Rear)
19 Inch (Reverse Staggered Trackday Setup) Front
Rear
9.0J
8.0J / 8.5J
ET22 - ET25
ET42 - ET46
263\/30 R19 (Trofeo R / Cup 2)
245\/35 R19 (Trofeo R / Cup 2)
19 Inch (Dedicated Winter Setup) Front & Rear (Square) 8.0J / 8.5J ET25 - ET30 (Front) \/ ET42 - ET46 (Rear) 245\/35 R19 all around

3. Spacers & hub adapters for RS3 Performance Edition

Do you want to push the original 19" forged Performance factory wheels (9.0J ET25 front / 8.0J ET46 rear) slightly further out to sit flush with the wide arches?

  • Spacers: On the original factory wheels H&R or Eibach spacers from 8 mm to 10 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 57.1 mm hub fitment and extended M14x1.5 wheel bolts.
  • Torque Splitter software & fitment: When changing wheel and tyre sizes the rolling circumference ratio between front and rear axle must remain within tight factory tolerances for the RS Torque Splitter rear-axle couplings to operate faultlessly.

4. Fixed labour rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Labour rate (Excl. VAT) Indicative fitting time
Complete wheel set fitting & balancing € 75 - € 115 45 - 60 minutes
Front spoiler / bumper lip / splitter fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Installation € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tailpipe (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box shifters"?

Many e-commerce shops function purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we intentionally do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/Akrapovič exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi RS3 Performance Edition (8Y 407 hp), would you like advice on 380mm RS Ceramic brake clearance or Reverse Staggered Trofeo R tyre sets or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl