Wheel Fitment Guide - Audi RS4 Avant (B8 \/ 8K V8)

Wheels Fitment Guide - Audi RS4 Avant (B8 / 8K V8)

Model generation B8 / 8K Avant (2012-2015) | 4.2 V8 FSI Naturally Aspirated (450 hp / 8,250 rpm) | Quattro Widebody

Wheels Fitment Guide Audi RS4 Avant B8 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS4 Avant V8 (B8 / 8K)?
The Audi RS4 Avant (Generation B8 / 8K) is one of the most beloved high-performance estates of all time. Powered by the high-revving 4.2-litre V8 FSI naturally aspirated engine (450 HP at 8,250 rpm), the B8 RS4 Avant features an impressive RS Widebody with broad ur-Quattro inspired arches. The car uses the VAG bolt pattern 5x112 with a 66.5 mm centre bore and M14x1.5 wheel bolts. Factory-fitted, the RS4 Avant V8 rides on an extremely wide setup of 19 inch (9.0J ET24 on 10-spoke v-design wheels) or the iconic 20 inch Rotor / 5-V-spoke wheels (9.0J ET26 with 265/30 R20 tyres all round). For aftermarket wheels (such as 10.0J or 10.5J width on 20 inch) a very low offset (ET18-ET25) is essential to fill the wide RS arches aggressively and flush, while maintaining sufficient spoke clearance around the 365 mm RS Wave brakes or optional 380 mm RS Ceramic Carbon discs. At Wheels 'N Customs in Nijkerk we pre-check every order based on your selected Make, Model, Specification, Year of Manufacture and chassis number.

1. Factory specifications (OEM) Audi RS4 Avant V8 (B8 / 8K)

The values below represent the original factory parameters of the Audi RS4 Avant (B8 / 8K). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Explanation & Advice
Bolt pattern (PCD) 5x112 Standard VAG 5-lug bolt circle on the MLB platform.
Centre bore (CB) 66.5 mm Large VAG MLB hub bore. Centre rings required for wheels with a larger hub bore (e.g. 73.1 mm).
Wheel fastener type M14 x 1.5 Ball-cone Bolts 140 Nm tightening torque recommended by Audi Sport.
OEM Wheel sizes (19" Standard RS) 9.0J x 19 ET24 Factory 10-spoke V-design alloy wheels in a square setup.
OEM Wheel sizes (20" Option Rotor / 5-V-Spoke) 9.0J x 20 ET26 Factory 20 inch Rotor two-tone or silver RS wheels.
OEM Tyre sizes 265/35 R19 (on 19") / 265/30 R20 (on 20") Supplied on Pirelli P Zero, Michelin Pilot Sport 4S or Continental SportContact 6 with XL load index and RO1 (Audi Sport spec).

2. Aftermarket Fitment Guide (19" & 20")

Want to give your Audi RS4 Avant B8 V8 an even tighter fill of the wide RS arches, deeper concavity or weight savings with Flow Formed / Custom Forged wheels from brands like Concaver, JR-Wheels (SL01 / JR21 / JR30), Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton Styling? Below are the ideal sizes for scratch-free fitment, also when lowered with Eibach, H&R or KW coilovers.

Wheel diameter & construction Position Recommended Rim Width (J) Ideal ET Value Range Recommended Tyre Size
19 Inch (OEM+ Winter / Performance Setup) Front & Rear (Square) 9.0J / 9.5J ET20 - ET25 265/35 R19
20 Inch (Absolute Sweet Spot Street Performance) Front & Rear (Square) 10.0J ET20 - ET25 265/30 R20 (or 275/30 R20)
20 Inch (Aggressive Deep Concave Show Stance) Front & Rear (Square) 10.5J ET18 - ET22 265/30 R20 (Light stretch on 10.5J) or 275/30 R20

3. Spacers & Bolt Pattern Adapters for Audi RS4 Avant B8 V8

Want to push the original 19" or 20" RS factory wheels (9.0J ET26 on 20 inch Rotor) further out to make them sit flush with the wide ur-Quattro arches?

  • Spacers: On the original 9.0J ET26 factory wheels, H&R or Eibach spacers of 12 mm to 15 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 66.5 mm hub fitment and extended M14x1.5 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Do you have an exclusive custom wheel set in mind with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt pattern adapters compensate for this but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total ET value in advance to prevent the wide tyres contacting the inner arch when compressing at speed.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we daily fit wheels, exhausts, bodykits and suspension on 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Part / Labour Labour rate (Excl. VAT) Indicative Fitment time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with our own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT (APK) assurance.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Capristo/HMS/Remus/Milltek exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT (APK) inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior checking of Make/Model/Version restocking charges of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi RS4 Avant V8 (B8 / 8K), would you like advice on RS Wave / Ceramic caliper clearance or wheel spacers, or would you like an all-in quotation including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl