Wheel Fitment Guide - Audi RS4 Avant Edition 25 Years (B9.5)

Wheels Fitment Guide - Audi RS4 Avant Edition 25 Years (B9.5)

Model generation B9.5 Facelift Limited (2024, 250 units) | 2.9 V6 TFSI BiTurbo (470 hp / 600 Nm) | Imola Yellow Heritage & RS Coilover Suspension

Wheels Fitment Guide Audi RS4 Avant Edition 25 Years B95 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS4 Avant Edition 25 Years (B9.5)?
The Audi RS4 Avant Edition 25 Years (Generation B9.5 Facelift) was released in 2024 as the ultimate tribute to 25 years of RS4 history (starting with the legendary B5 RS4 Avant in 1999). Limited worldwide to exactly 250 units and mainly offered in the nostalgic Imola Yellow paint, the uprated 2.9-litre V6 BiTurbo delivers 470 HP and 600 Nm of torque. The Edition 25 Years is equipped with a manually adjustable RS coilover suspension, stiffer control arm bushes and additional negative camber at the front (-2 degrees). The car uses the VAG bolt pattern 5x112 with a 66.5 mm centre bore and M14x1.5 wheel bolts. Factory-fitted the Edition 25 Years rides on specific 20 inch forged lightweight wheels (9.0J ET22 in matte black with Pirelli P Zero Corsa PFI high-performance tyres in 275/30 R20). Because this anniversary model comes standard with solid 400 mm RS Ceramic Brakes with yellow 6-piston calipers at the front, it places high demands on spoke and barrel clearance of aftermarket wheels. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Audi RS4 Avant Edition 25 Years B9.5

The values below represent the original factory parameters of the Audi RS4 Avant Edition 25 Years (B9.5). Use these as technical reference when purchasing new wheels or spacers.

Specification Factory Value (OEM) Notes & Advice
PCD (Bolt Pattern) 5x112 Standard VAG 5-bolt circle on the MLB-Evo platform.
Centre Bore (CB) 66.5 mm Large VAG MLB-Evo hub bore. Use centre rings for wheels with a larger hub bore (e.g. 73.1 mm).
Wheel Fastening Type M14 x 1.5 Ball Conical Bolts 140 Nm torque recommended by Audi Sport.
OEM Wheel Sizes (20" Edition 25 Years Forged) 9.0J x 20 ET22 Factory 20-inch forged lightweight wheels in Silk Matte Black in a square setup.
OEM Tyre Fitments 275/30 R20 Supplied on Pirelli P Zero Corsa PFI (Audi Sport spec) with XL load index. Includes an extra set of Pirelli P Zero Trofeo RS semi-slicks for track use.

2. Aftermarket Fitment Guide (19" & 20")

Do you want to give your Audi RS4 Avant Edition 25 Years B9.5 an even tighter fill of the wide RS arches, a spare wheel set or weight saving with custom forged wheels from brands such as Concaver, JR-Wheels (SL01 / JR21 / JR30), Rotiform, Veemann, Vossen, OZ Racing, BC Forged, ABT Sportsline or Maxton-styling? Below you will find the ideal sizes for a scratch-free fit, also with the maximum lowering from the factory coilover set (-20 mm).

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
19 Inch (OEM+ Winter / Trackday Setup) Front & Rear (Square) 9.0J / 9.5J ET20 - ET25 265/35 R19
20 Inch (Absolute Sweet Spot Street Performance) Front & Rear (Square) 10.0J ET20 - ET25 275/30 R20 (or 285/30 R20)
20 Inch (Aggressive Deep Concave Show Stance) Front & Rear (Square) 10.5J ET18 - ET22 275/30 R20 (Light stretch on 10.5J) or 285/30 R20

3. Spacers & Bolt Adapters for RS4 Edition 25 Years

Do you want to push the original 20" Edition 25 Years factory wheels (9.0J ET22) slightly further out to make them flush with the wide arches?

  • Spacers: On the original 9.0J ET22 factory wheels you can fit H&R or Eibach spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear. Use only hub-centred aluminium spacers with the specific 66.5 mm hub fitment and extended M14x1.5 wheel bolts.
  • Bolt Adapters & Fitment Check: Do you have an exclusive custom wheel set in mind with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt adapters address this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total ET in advance to prevent wide tyres from contacting the wheel arches when the suspension compresses at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Part / Labour Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Splitter / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbar Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/Akrapovi? exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior checking of Make/Model/Variant restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi RS4 Avant Edition 25 Years (B9.5), would you like advice on 400mm RS Ceramic caliper clearance, factory bolt set adjustments or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl