Wheel Fitment Guide - Audi RS4 Avant Nogaro Selection (B8 V8)

Wheels Fitment Guide - Audi RS4 Avant Nogaro Selection (B8 V8)

Model generation B8 Limited Anniversary Edition (2014) | 4.2 V8 FSI Naturally Aspirated (450 hp / 8,250 rpm) | 20 Years RS Anniversary Quattro Widebody

Wheels Fitment Guide Audi RS4 Avant Nogaro Selection B8 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS4 Avant Nogaro Selection (B8)?
The Audi RS4 Avant Nogaro Selection (B8 generation) was released to celebrate the 20th anniversary of the legendary Audi RS2 Avant from 1994. Finished in the distinctive Nogaro Blue pearlescent paint and powered by the high‑revving 4.2‑litre V8 FSI naturally aspirated engine (450 HP at 8,250 rpm), this is a rare collectors’ item. The car features the wide RS Widebody with flared ur‑Quattro wheelarches. The car uses the VAG bolt pattern 5x112 with a 66.5 mm centre bore and M14x1.5 wheel bolts. Factory‑fit the Nogaro Selection rides on special 20 inch forged wheels (9.0J ET26 in a 5‑V‑spoke design on 265/30 R20 tyres all round). For aftermarket wheels (such as 10.0J or 10.5J widths on 20 inch) a very low offset (ET18–ET25) is essential to aggressively and flushly fill the wide RS wheelarches, while retaining sufficient spoke clearance around the 365 mm RS Wave brakes or optional 380 mm RS Ceramic Carbon discs. At Wheels 'N Customs in Nijkerk we inspect every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Audi RS4 Avant Nogaro Selection B8

The values below represent the original factory parameters of the Audi RS4 Avant Nogaro Selection (B8 V8). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory Value (OEM) Notes & Advice
Pitch Circle Diameter (PCD) 5x112 Standard VAG 5-bolt PCD on the MLB platform.
Centre Bore (CB) 66.5 mm Large VAG MLB hub bore. Use centre rings for wheels with a larger hub bore (e.g. 73.1 mm).
Wheel Fastening Type M14 x 1.5 Ball Conical Bolts 140 Nm torque recommended by Audi Sport.
OEM Wheel Sizes (20" Nogaro Special Edition) 9.0J x 20 ET26 Factory 20 inch 5-V-spoke forged wheels in gloss black or titanium-look.
OEM Tyre Sizes 265/30 R20 Supplied on Pirelli P Zero or Michelin Pilot Sport 4S with XL load index and RO1 (Audi Sport spec).

2. Aftermarket Fitment Guide (19" & 20")

Do you want to give your Audi RS4 Avant Nogaro Selection B8 a tighter fill of the wide RS arches, deeper concavity or weight savings with Flow Formed / Custom Forged wheels from brands like Concaver, JR-Wheels (SL01 / JR21 / JR30), Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton-styling? Below are the ideal sizes for a scratch-free fitment, also when lowered with Eibach, H&R or KW coilovers.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
19 Inch (OEM+ Winter / Track Performance Setup) Front & Rear (Square) 9.0J / 9.5J ET20 - ET25 265/35 R19
20 Inch (Absolute Sweet Spot Street Performance) Front & Rear (Square) 10.0J ET20 - ET25 265/30 R20 (or 275/30 R20)
20 Inch (Aggressive Deep Concave Show Stance) Front & Rear (Square) 10.5J ET18 - ET22 265/30 R20 (Light stretch on 10.5J) or 275/30 R20

3. Spacers & Bolt-Through Adapters for RS4 Nogaro Selection

Do you want to push the original 20" Nogaro Selection factory wheels (9.0J ET26) slightly further out to make them flush with the wide ur-Quattro arches?

  • Spacers: On the original 9.0J ET26 factory wheels H&R or Eibach spacers of 12 mm to 15 mm can be fitted on the front and 12 mm to 15 mm on the rear. Use only hub-centric aluminium spacers with the specific 66.5 mm hub fit and extended M14x1.5 wheel bolts.
  • Bolt-Through Adapters & Fitment Check: Do you have an exclusive custom wheel set in mind with a different PCD (e.g. 5x112 to 5x120)? Bolt-through adapters solve this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the final ET in advance to prevent wide tyres contacting the inner arches during suspension travel at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Service Labour Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fit & Balance € 75 - € 115 45 - 60 minutes
Front Spoiler / Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and APK-certainty.

How does the vehicle check and fitment guarantee from Wheels 'N Customs work?

In our webshop you filter parts by Brand, Type, Version and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Capristo/HMS/Remus/Milltek exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi RS4 Avant Nogaro Selection (B8 V8), would you like advice on RS Wave / Ceramic caliper clearance or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl