Wheel Fitment Guide: Audi RS4 & RS5 B9 (2017-Present)
Why is accurate fitment essential on the Audi RS4 / RS5 B9?
The RS4 and RS5 B9 have 'quattro blisters': extremely wide, aggressively flared arches. Factory wheels have a very low offset (ET22 - ET26). This makes the car ideal for very concave wheel designs. However, choosing wheels with too high an ET will make the wheels sit too far recessed and they will hit the suspension or the large RS (Ceramic) calipers on the front axle.
1. Original Factory Specifications (OEM Fits)
The OEM specifications below apply to the Audi RS4 Avant (B9/B9.5) and RS5 Coupé/Sportback (B9/B9.5):
| Specification |
Factory Value (OEM) |
Expert Note |
| Bolt Pattern (PCD) |
5x112 |
Standard VAG 5-stud bolt pattern. |
| Centre Bore (CB) |
66.5 mm |
Note: Larger Audi MLB-Evo centre bore (not the 57.1 mm of the Golf/A3!). |
| OEM Wheel Sizes |
19 and 20 Inch |
19" (10-spoke OEM 9.0Jx19 ET24) and 20" (Milled/Forged OEM 9.0Jx20 ET26 / 9.0Jx20 ET22). |
| OEM ET Range |
ET22 - ET26 |
Extremely low ET to fill the widened RS arches! |
| Wheel Fastening |
M14 x 1.5 Spherical (R13) |
Note: OEM wheels use spherical bolts. Aftermarket wheels almost always require 60° conical bolts! |
| Tightening Torque |
140 Nm |
Tighten to the correct specified torque with a calibrated torque wrench. |
2. Aftermarket Fitment Guide (What fits safely?)
Give your Audi RS4 or RS5 B9 an even more aggressive look with 'Deep Concave' wheel sets that fit without rubbing to the bodywork:
| Size |
Wheel Width (J) |
Ideal ET |
Recommended Tyre Size |
Fitment Character |
| 20 Inch (Deep Concave) |
20x10.0J (All around) |
ET20 - ET25 |
275/30 R20 |
Most Popular Choice! Extremely deep concavity, fills the widened arches perfectly. |
| 20 Inch (Ultra Wide) |
20x10.5J (All around) |
ET22 - ET25 |
275/30 R20 or 285/30 R20 |
Aggressive OEM+ stance. Requires slight camber adjustment with significant lowering. |
| 21 Inch (Show & Performance) |
21x10.0J (All round) |
ET22 - ET25 |
275/25 R21 or 285/25 R21 |
Exclusive high-end look. Visually maximises filled wheel arches. |
3. Wheel Spacers, Hub Adapters & Lowering Advice
The Audi RS4/RS5 B9 already has an impressively wide track from the factory, but with the right fitment tricks the aggressive silhouette really comes alive.
- Wheel Spacers (Spacers): Are you running the original 20 inch Audi Sport wheels (9.0Jx20 ET26 / ET22)? A spacer set of 10 mm to 12 mm per side all round will bring the factory wheels exactly flush with the body. Use only hub-centred spacers (66.5 mm) and extended M14x1.5 wheel bolts!
- Lowering (DRC Compatible / Eibach / H&R / KW HAS): Many RS4/RS5 models are equipped with Dynamic Ride Control (DRC). When lowering with height-adjustable lowering springs (KW HAS / H&R VTF) or Eibach springs, the adaptive DRC system will remain 100% functional. In combination with a 20x10.0J ET22 wheel setup and 275/30 R20 tyres the fitment remains 100% clearance-free.
- Hub Adapters: Want to fit wheels with a different bolt pattern (such as BMW’s 5x120 or Japanese brands’ 5x114.3)? This is possible using custom hub adapters of at least 15 mm thickness. Remember that the effective ET value of the wheel decreases by the thickness of the adapter.
4. Frequently Asked Questions (FAQ)
Will 20x10.0J ET22 wheels rub on a lowered Audi RS4 or RS5 B9?
No, provided you choose the recommended tyre size 275/30 R20. The widened RS arches of the B9 generation offer plenty of clearance for 10.0J wide wheels with an ET value from ET20 to ET25, even with a drop of 25 mm to 35 mm.
Do aftermarket wheels fit over the optional Ceramic Brakes (RS Ceramic)?
The RS4 and RS5 B9 with RS Ceramic brakes have massive 400 mm carbon-ceramic discs on the front axle with large 6‑piston calipers. Not all 20 inch wheels provide sufficient spoke clearance (brake clearance). Choose wheels that are specifically approved for RS4/RS5 B9 Ceramic clearance.
Do I need to use conical wheel bolts with new aftermarket wheels?
Yes! The original factory wheels from Audi Sport use ball-conical (R13) bolts. Virtually all aftermarket wheel manufacturers (such as Concaver, JR-Wheels, Rotiform, Borbet, GMP, Vossen) use a 60° conical bolt seat. Fitting the factory bolts to conical aftermarket wheels can lead to damage or wheel loosening.
Have Your Fitment Checked By The Experts
Unsure about the correct ET value, want to know if your dream wheels will clear your RS Ceramic brakes, or looking for advice on a suitable lowering kit for your Audi RS4 or RS5? Contact the experts at Wheels 'N Customs in Nijkerk directly.
Ask Our Experts For Advice