Wheel Fitment Guide - Audi RS5 Coupé & Cabriolet (B8 / 8T V8)

Wheels Fitment Guide - Audi RS5 Coupé & Cabriolet (B8 / 8T V8)

Model generation B8 / 8T Pre-Facelift & Facelift (2010-2015) | 4.2 V8 FSI Naturally Aspirated (450 hp / 8,250 rpm) | Quattro Widebody

Wheels Fitment Guide Audi RS5 B8 8T Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS5 V8 (B8 / 8T)?
The Audi RS5 Coupé and Cabriolet (Generation B8 / 8T) are celebrated as the only RS5 with a high-revving 4.2-litre V8 FSI naturally aspirated engine (450 HP up to 8,250 rpm). The B8 RS5 features a pronounced RS Widebody with broad ur-Quattro-inspired wings. The car uses the VAG bolt pattern 5x112 with a 66.5 mm centre bore and M14x1.5 wheel bolts. Factory-fitted, the RS5 V8 sits on an extremely wide setup of 19 inch (9.0J ET24 on 5-arm structure wheels) or the iconic 20 inch Rotor / 5-V-spoke wheels (9.0J ET26 with 275/30 R20 tyres all round). For aftermarket wheels (such as 10.0J or 10.5J width on 20 inch) a very low offset (ET18-ET25) is essential to aggressively and flushly fill the wide RS arches, while maintaining sufficient spoke clearance around the 365 mm RS Wave brakes or optional 380 mm RS Ceramic Carbon discs. At Wheels 'N Customs in Nijkerk we check every order in advance based on your chosen Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Audi RS5 V8 (B8 / 8T)

The values below represent the original factory parameters of the Audi RS5 (B8 / 8T Coupé & Cabriolet). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt Pattern (PCD) 5x112 Standard VAG 5-bolt PCD on the MLB platform.
Centre Bore (CB) 66.5 mm Large VAG MLB hub bore. Hub-centric rings required for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel Fastener Type M14 x 1.5 Ball Conical Bolts 140 Nm torque recommended by Audi Sport.
OEM Wheel Sizes (19" Standard RS) 9.0J x 19 ET24 Factory 5-arm alloy wheel construction in a square setup.
OEM Wheel Sizes (20" Option Rotor / 5-V-Spoke) 9.0J x 20 ET26 Factory 20 inch Rotor two-tone or silver RS wheels.
OEM Tyre Sizes 265/35 R19 (on 19") / 275/30 R20 (on 20") Supplied on Pirelli P Zero, Michelin Pilot Sport 4S or Continental SportContact 6 with XL Load Index and RO1 (Audi Sport spec).

2. Aftermarket Fitment Guide (19" & 20")

Do you want to give your Audi RS5 B8 V8 an even tighter fill of the wide RS wheel arches, deeper concavity or weight savings with Flow Formed / Custom Forged wheels from brands like Concaver, JR-Wheels (SL01 / JR21 / JR30), Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton-styling? Below you will find the ideal sizes for a scratch-free fitment, also when lowering with Eibach, H&R or KW coilovers.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
19 Inch (OEM+ Winter / Performance Setup) Front & Rear (Square) 9.0J / 9.5J ET20 - ET25 265/35 R19
20 Inch (Absolute Sweet Spot Street Performance) Front & Rear (Square) 10.0J ET20 - ET25 275/30 R20
20 Inch (Aggressive Deep Concave Show Stance) Front & Rear (Square) 10.5J ET18 - ET22 275/30 R20 (Light stretch on 10.5J) or 285/30 R20

3. Wheel Spacers & PCD Adapters for Audi RS5 B8 V8

Do you want to push the original 19" or 20" RS factory wheels (9.0J ET26 on 20 inch Rotor) slightly further out to sit flush with the wide ur-Quattro arches?

  • Spacers: On the original 9.0J ET26 factory wheels H&R or Eibach spacers of 12 mm to 15 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 66.5 mm hub fitment and extended M14x1.5 wheel bolts.
  • PCD Adapters & Fitment Check: Do you have an exclusive custom wheelset in mind with a different bolt pattern (e.g. 5x112 to 5x120)? PCD adapters solve this, but they have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the resulting overall ET beforehand to prevent the wide tyres from contacting the wheelarches when the suspension is compressed at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Mount & Balance € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does the vehicle check and fitment guarantee from Wheels 'N Customs work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 or 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Nearly all our alloy wheels, lowering kits from Eibach/H&R/KW, Capristo/HMS/Remus/Milltek exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi RS5 V8 (B8/8T), would you like advice on RS Wave/Ceramic caliper clearance or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl