Model generation C8.5 Facelift Performance (2023-present) | 4.0 V8 TFSI BiTurbo (630 hp / 850 Nm) | Lightweight Forged 22 Inch RS Ceramic

Why is correct wheel fitment crucial for the Audi RS7 Sportback Performance (C8.5)?
The Audi RS7 Sportback Performance (Generation C8.5 Facelift, produced from model year 2023) is the absolute flagship of Audi Sport in the 4-door coupé segment. Powered by the uprated 4.0-litre BiTurbo V8 producing up to 630 PK and 850 Nm torque with larger turbochargers and reduced sound insulation, this stylish powerhouse accelerates to 100 km/u in just 3.4 seconds. The car uses the MLB-Evo platform with the VAG bolt pattern 5x112, a 66.5 mm hub bore and M14x1.5 wheel bolts. Factory-fitted, the RS7 Performance C8.5 rides on specially developed, ultra-lightweight 22 inch forged Y-spoke wheels (10.5J ET19 with 285/30 R22 Continental SportContact 7 tyres) which together save no less than 20 kg of unsprung weight. When selecting aftermarket wheels (such as 10.5J or 11.0J on 22 or 23 inch) a very low offset (ET12–ET19) is essential to fill the wide wheelarches flush while preserving sufficient spoke clearance around the 420 mm steel or optional 440 mm RS Ceramic Carbon discs with 10‑piston calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Audi RS7 Sportback Performance (C8.5 Facelift). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5-lug bolt circle on the MLB-Evo platform. |
| Hub bore (CB) | 66.5 mm | Large VAG MLB-Evo hub bore. Centre rings required for wheels with a larger hub bore (e.g. 73.1 mm). |
| Wheel fixing type | M14 x 1.5 Ball conical bolts | 160 Nm torque recommended by Audi Sport. |
| OEM Wheel sizes (21" Standard RS Performance) | 10.5J x 21 ET19 | Factory 21 inch 10‑spoke star‑design alloy wheels in square setup. |
| OEM Wheel sizes (22" Option Lightweight Forged) | 10.5J x 22 ET19 | Factory 22 inch ultra‑lightweight forged wheels in Matt Titanium, Gloss Black or Neodyme Gold. |
| OEM Tyre sizes | 275/35 R21 (on 21") / 285/30 R22 (on 22") | Supplied on Continental SportContact 7, Hankook Ventus S1 evo3 or Pirelli P Zero Corsa with XL Load Index and RO1 (Audi Sport spec). |
Do you want to give your Audi RS7 Sportback Performance C8.5 an even tighter fill of the wide RS wheelarches, a deep concave look or weight savings with Custom Forged wheels from brands like Concaver, JR‑Wheels, Rotiform, Veemann, Vossen, OZ Racing, BC Forged, ABT Sportsline, Urban Automotive or Maxton‑styling? Below you’ll find the ideal sizes for a scratch‑free fitment, including cars with RS sport suspension plus with DRC (Dynamic Ride Control).
| Wheel diameter & construction | Position | Recommended wheel width (J) | Ideal ET range | Recommended tyre size |
|---|---|---|---|---|
| 22 Inch (OEM+ Winter / Performance Setup) | Front & Rear (Square) | 10.5J / 11.0J | ET15 - ET20 | 285/30 R22 |
| 22 Inch (Absolute Sweet Spot Street Performance) | Front & Rear (Square) | 10.5J / 11.0J | ET12 - ET18 | 285/30 R22 (or 295/30 R22) |
| 23 Inch (Aggressive Deep Concave Show Stance) | Front & Rear (Square) | 10.5J / 11.0J | ET12 - ET18 | 285/25 R23 (or 295/25 R23) |
Do you want to push the original 22" forged Performance factory wheels (10.5J ET19) slightly further out to make them sit flush with the wide wheel arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT-certainty.
In our webshop you filter parts by Brand, Model, Specification and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After placing your order, our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval is your order processed or fitted.
Yes. Almost all our light-alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/ABT/Milltek exhaust systems and bodykits from Maxton Design carry official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi RS7 Sportback Performance (C8.5 630 hp), would you like advice about 440mm RS Ceramic caliper clearance or wheel spacers, or would you like an all-in quote including garage fitting in Nijkerk?