Model generation Type 8B Coupé & B4 Sedan/Avant (1990-1995) | 2.2 20V Turbo (3B 220 hp / ABY 230 hp - 350 Nm) | Torsen Quattro All-Wheel Drive Legend

Why is correct wheel fitment crucial for the Audi S2 (Coupé / Sedan / Avant)?
The Audi S2 (produced from 1990 to 1995 in Coupé Type 8B, Saloon B4 and Avant B4 with an original new price of around € 35,000,- to € 42,000,-) is the direct legendary successor to the iconic Ur-Quattro. Powered by the famous 2.2‑litre 20V 5‑cylinder turbo engine (3B engine with 220 HP or the later ABY engine with 230 HP and 6‑speed gearbox) and equipped with permanent Torsen Quattro four‑wheel drive, the Audi S2 is an absolute dream car for youngtimer and rally enthusiasts. To cope with the high torque, Audi equipped the S2 with hubs using the VAG 5x112 bolt pattern, a 57.1 mm centre bore and M14x1.5 wheel bolts (as opposed to regular Audi 80/Coupé models that had 4x108). Factory‑fitted, the Audi S2 rides on 16 inch Avus / Ronal 5‑spoke wheels (7.0J ET37 with 205/55 R16 or 215/40 R16 tyres). When selecting period‑correct or modern classic wheels (such as 17x7.5J/8.0J or 18x8.0J with ET30 to ET37 from BBS, OZ Racing, Speedline or RS2‑style wheels) wheels must be checked for spoke clearance around the Girling 60 twin‑piston calipers or any Porsche RS2 Brembo upgrades. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the Audi S2 (Coupé, Saloon & Avant Quattro). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Reinforced 5‑bolt pitch circle on the S2 / Quattro platform. |
| Centre bore (CB) | 57.1 mm | Standard VAG B4 centre bore. Hub centring rings required for wheels with a larger centre bore (e.g. 66.6 mm or 73.1 mm). |
| Wheel fastening type | M14 x 1.5 Conical Bolts | 120 Nm torque recommended by Audi Sport. |
| OEM Wheel sizes (16" Standard Avus / Ronal 5‑Spoke) | 7.0J x 16 ET37 | Factory 16 inch silver Avus alloy wheels in square fitment. |
| OEM Tyre sizes | 205/55 R16 (on 3B) / 215/40 R16 (on ABY) | Supplied on Michelin Pilot SX, Goodyear Eagle GS‑A or Dunlop SP Sport. |
Want to give your Audi S2 Coupé, Saloon or Avant a period‑correct classic look, a wider stance or an RS2‑upgrade appearance with wheels from brands like BBS (LM / CH / RK / RS), OZ Racing (Futura / Ultraleggera / Superturismo), Speedline, JR‑Wheels (JR9 / JR11 / JR23 / SL01), Concaver, Borbet, KW Suspension or H&R? Below are the ideal sizes for a scratch‑free fitment, also when lowered with Eibach Pro‑Kit, H&R or KW V1/V3 coilovers.
| Wheel diameter & construction | Position | Recommended wheel width (J) | Ideal ET range | Recommended tyre size |
|---|---|---|---|---|
| 17 Inch (Period‑Correct Classic OEM+ Sweet Spot) | Front & Rear (Square) | 7.5J / 8.0J | ET30 - ET37 | 215/45 R17 (or 225/45 R17) |
| 18 Inch (RS2‑Look / Performance Stance Setup) | Front & Rear (Square) | 8.0J | ET30 - ET35 | 225/40 R18 |
| 18 Inch (Aggressive Deep Concave / Wide Setup) | Front & Rear (Square) | 8.5J | ET28 - ET32 | 225/40 R18 (Light stretch on 8.5J to keep clear of wheel arches) |
Would you like to original 16" Avus factory wheels (7.0J ET37) pushed further out to sit flush with the body arches?
In our spacious, professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with our own physical workshop in Nijkerk. We test, fit and inspect parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1–2 photos of your brakes or wheel arches. Only after 100% approval is your order processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Fox/BN-Pipes exhaust systems and Maxton Design bodykits have official German TÜV, ECE or ABE certification. This ensures a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and mounted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi S2 (Coupé / Sedan / Avant 2.2 20V Turbo Quattro), would you like advice about Girling 60 or Porsche RS2 brake caliper clearance, BBS / OZ Racing wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?