Wheel Fitment Guide - Audi S4 Sedan & Avant (B9 / B9.5)

Wheels Fitment Guide - Audi S4 Sedan & Avant (B9 / B9.5)

Model generations B9 & B9.5 Facelift (2016-present) | 3.0 TFSI V6 Turbo (354 hp) & 3.0 TDI V6 Diesel (347 hp / 341 hp) | Quattro MLB-Evo Platform

Wheels Fitment Guide Audi S4 B9 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi S4 (B9 / B9.5)?
The Audi S4 B9 (Sedan & Avant) is the sporty workhorse of the D-segment. Powered by the 3.0 TFSI V6 petrol engine (354 HP) or the later 3.0 TDI V6 diesel with MHEV technology (347 HP / 341 HP), the S4 places high demands on wheel choice. Built on the MLB-Evo platform the S4 uses the VAG bolt pattern 5x112 with a 66.5 mm centre bore. Factory-fit S4s come on 18-inch or 19-inch alloy wheels (8.5J ET32 to ET40). For aftermarket alloys (such as 8.5J, 9.0J or 9.5J width on 19-inch or 20-inch) the correct ET value (ET30-ET35) is essential for a neat flush fit without rubbing and sufficient spoke clearance around the 350 mm 6-piston S calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Audi S4 B9 / B9.5

The values below represent the original factory parameters of the Audi S4 (B9 & B9.5 Sedan & Avant). Use these as technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 Standard VAG 5-lug bolt circle on the MLB-Evo platform.
Centre bore (CB) 66.5 mm Large VAG MLB-Evo centre bore. Hub centring rings required for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel fastening type M14 x 1.5 Ball-conical Bolts 120 Nm torque recommended by Audi.
OEM Wheel sizes (18" Standard) 8.5J x 18 ET40 (or ET32) Factory 5-double-spoke S-design alloy wheels.
OEM Wheel Sizes (19" Audi Sport Option) 8.5J x 19 ET40 (or ET32) Factory 5-V-spoke star designation or 5-arm rotor S-design wheels.
OEM Tyre Sizes 245\/40 R18 (on 18") \/ 255\/35 R19 (on 19") Supplied on Continental SportContact 6 or Hankook Ventus S1 evo3 with XL Load Index.

2. Aftermarket Fitment Guide (19" & 20")

Would you like to give your Audi S4 Sedan or Avant a tighter fill of the wheel arches, deeper concavity or weight savings with Flow Formed / Forged wheels from brands such as Concaver, JR-Wheels (SL01 / JR21 / JR30), Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.

Wheel diameter Recommended Rim Width (J) Ideal ET Value Range Recommended Tyre Size Fitment Characteristic
19 Inch (OEM+ Comfort / Winter Setup) 8.5J / 9.0J ET32 - ET38 255/35 R19 Preserves factory dynamics with a slightly fuller fill of the arches.
20 Inch (Absolute Sweet Spot Street Performance) 9.0J / 9.5J ET30 - ET35 255\/30 R20 (or 265\/30 R20) The most chosen size for the S4. Fills the arches flush with deep concavity.
20 Inch (Aggressive Wide Flush Show Stance) 9.5J ET30 - ET32 255\/30 R20 (Light stretch) or 265\/30 R20 Extremely deep concavity and wide appearance. 100% scratch-free on a standard chassis.

3. Wheel Spacers & Bolt Pattern Adapters for Audi S4 B9 / B9.5

Do you want to push the original 18" or 19" S-line factory wheels (8.5J ET40 / ET32) slightly further out to make them sit flush with the fenders?

  • Wheel Spacers: On the original factory wheels H&R or Eibach spacers of 12 mm to 15 mm at the front and 15 mm to 18 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 66.5 mm hub bore and extended M14x1.5 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Do you have an exclusive custom wheel set in mind with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt pattern adapters accommodate this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total effective ET in advance to prevent tyres from contacting the wheel arch edges when compressing at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):

Component / Operation Labour Rate (Excl. VAT) Indicative Labour Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Lip / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and APK-certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Brand, Type, Specification and Year of manufacture (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 or 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi S4 Sedan or Avant (B9 / B9.5), would you like advice on S-caliper clearance or Quattro requirements, or would you like an all-in quotation including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl