Model generation C8 Sportback 4-Door Coupe (2019-present) | 3.0 TDI V6 Diesel MHEV (349 hp / 344 hp) | Quattro MLB-Evo Platform

Why is correct wheel fitment crucial for the Audi S7 Sportback (C8)?
The Audi S7 Sportback (C8) combines an elegant four-door coupe silhouette with impressive V6 TDI performance. Powered by the 3.0-litre V6 TDI engine with Electrically Driven Compressor (EPC) and 48V Mild Hybrid technology (349 HP / 700 Nm), the S7 places high demands on wheel strength and fit. Built on the MLB-Evo platform, the S7 C8 uses the VAG bolt pattern 5x112 with a 66.5 mm centre bore. Factory wheels are 20 inch (8.5J ET30) or 21 inch (8.5J ET19 / 9.0J ET22). When choosing aftermarket wheels (such as 9.5J or 10.0J width on 21 or 22 inch) an accurately calculated offset (ET22-ET28) is crucial for a tight flush fit without rubbing and adequate clearance around the solid 400 mm 6-piston S calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the Audi S7 Sportback (C8). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5-bolt circle on the MLB-Evo platform. |
| Centre bore (CB) | 66.5 mm | Large VAG MLB-Evo centre bore. Hub rings required for wheels with a larger centre bore (e.g. 73.1 mm). |
| Wheel attachment type | M14 x 1.5 Conical Bolts | A torque of 140 Nm recommended by Audi. |
| OEM Wheel Sizes (20" Standard) | 8.5J x 20 ET30 | Factory 5‑arm S‑design alloy wheels. |
| OEM Wheel Sizes (21" Audi Sport Option) | 8.5J x 21 ET19 / 9.0J x 21 ET22 | Factory 5‑V‑spoke or 5‑arm star‑design Audi Sport wheels. |
| OEM Tyre Sizes | 255/40 R20 (on 20") / 255/35 R21 (on 21") | Supplied on Continental SportContact 6, Pirelli P Zero or Michelin Pilot Sport 4S with XL load index. |
Do you want to give your Audi S7 Sportback an even tighter fill of the wheel arches, deep concavity or weight savings with Flow Formed / Custom Forged wheels from brands like Concaver, JR‑Wheels (SL01 / JR21 / JR30), Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton‑styling? Below you’ll find the ideal sizes for a scratch‑free fit, even on cars with S‑air suspension.
| Wheel Diameter | Recommended Wheel Width (J) | Ideal ET Range | Recommended Tyre Size | Fitment Characteristics |
|---|---|---|---|---|
| 20 Inch (OEM+ Comfort / Winter Setup) | 9.0J / 9.5J | ET25 - ET30 | 255/40 R20 (or 265/40 R20) | Preserves optimal ride comfort with a nicely filled wheel arch. |
| 21 Inch (Absolute Sweet Spot Street Performance) | 9.5J / 10.0J | ET22 - ET28 | 265/35 R21 (or 275/35 R21) | The most chosen size for the S7 C8. Fills the arches flush with deep concavity. |
| 22 Inch (Exclusive Wide Flush Show Stance) | 9.5J / 10.0J | ET22 - ET26 | 265/30 R22 (or 285/30 R22) | Extremely impressive visual impact. 100% scratch‑free on standard and air suspension. |
Do you want to push the original 20" or 21" S‑line factory wheels (8.5J ET30 / 9.0J ET22) slightly further out to make them sit flush with the arches?
In our spacious and professional workshop in Nijkerk we daily fit wheels, exhausts, bodykits and suspension on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle‑back / Cat‑back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT-certainty.
In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to cancel your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi S7 Sportback (C8), want advice on 400mm S-brake caliper clearance or Quattro requirements, or would you like an all-in quote including workshop fitting in Nijkerk?