Model generations FY SUV & FY Sportback (2017-present) | 3.0 TFSI V6 Turbo (354 hp) & 3.0 TDI V6 Diesel (347 hp / 341 hp) | Quattro MLB-Evo Platform
Why is correct wheel fitment crucial for the Audi SQ5 (FY)?
The Audi SQ5 FY (SUV & Sportback) is the sporty top version in Audi’s mid-size SUV range. Powered by the 3.0 TFSI V6 petrol engine (354 HP) or the later MHEV 3.0 TDI V6 diesel engine with electrically assisted compressor (347 HP / 341 HP), the SQ5 places specific demands on wheel choice. Built on the MLB-Evo platform the SQ5 uses the VAG bolt pattern 5x112 with a 66.5 mm centre bore. Factory-fitted wheels are 20 inch (8.0J ET39) or 21 inch (8.5J ET34). For aftermarket alloys (such as 9.0J, 9.5J or 10.0J widths on 20, 21 or 22 inch) the correct ET value (ET28-ET35) and load rating (minimum 800 kg per wheel) are essential for a tight flush fitment without rubbing and adequate spoke clearance around the large 375 mm 6-piston S brake calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the Audi SQ5 & SQ5 Sportback (FY). Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5-lug bolt circle on the MLB-Evo platform. |
| Centre bore (CB) | 66.5 mm | Large VAG MLB-Evo hub bore. Centre rings required for wheels with a larger hub diameter (e.g. 73.1 mm). |
| Type of Wheel Fastening | M14 x 1.5 Ball-conical Bolts | Tightening torque of 140 Nm recommended by Audi. |
| OEM Wheel Sizes (20" Standard) | 8.0J x 20 ET39 | Factory 5-double-spoke S-design alloy wheels. |
| OEM Wheel Sizes (21" Audi Sport Option) | 8.5J x 21 ET34 | Factory 5-V-spoke offset or 5-arm turbine Audi Sport wheels. |
| OEM Tyre Sizes | 255/45 R20 (on 20") / 255/40 R21 (on 21") | Supplied on Pirelli P Zero, Continental SportContact 6 or Hankook Ventus S1 evo3 SUV with XL Load Index. |
Do you want to give your Audi SQ5 SUV or Sportback an even tighter wheel arch fill, deep concavity or weight savings with Flow Formed / Forged wheels from brands like Concaver, JR-Wheels (SL01 / JR21 / JR30), Rotiform, Veemann, Vossen, OZ Racing, BC Forged or Maxton-styling? Below you will find the ideal sizes for a scratch-free fit, even on cars with S-air suspension.
| Wheel Diameter | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size | Fitment Characteristic |
|---|---|---|---|---|
| 20 Inch (OEM+ Comfort / Winter Setup) | 8.5J / 9.0J | ET30 - ET35 | 255/45 R20 | Preserves factory dynamics with a slightly fuller wheel-arch fill. |
| 21 Inch (Absolute Sweet Spot Street Performance) | 9.0J / 9.5J | ET28 - ET33 | 255/40 R21 (or 265/40 R21) | The most chosen size for the SQ5. Fills the arches flush with deep concavity. |
| 22 Inch (Exclusive Wide Flush SUV Show Stance) | 9.5J / 10.0J | ET28 - ET32 | 265/35 R22 (or 285/35 R22) | Extremely deep concavity and powerful presence. 100% scratch-free on standard and air suspension. |
Do you want to push the original 20" or 21" S-line factory wheels (8.0J ET39 / 8.5J ET34) slightly further out to make them sit flush with the fenders?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Labour Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lid Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you a 100% fitment guarantee, manufacturer warranty and APK-certainty.
In our webshop you filter parts by Brand, Model, Trim and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Trim restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi SQ5 or SQ5 Sportback (FY), would you like advice about 375mm S-brake caliper clearance or Quattro requirements, or would you like an all-in quote including workshop fitting in Nijkerk?