Wheel Fitment Guide: Audi TT / TTS / TT RS 8S (2014-2023)

Wheel Fitment Guide: Audi TT / TTS / TT RS 8S (2014-2023)

The Ultimate Technical Wheel & Suspension Guide for the Audi TT 8S

Want to equip your Audi TT, TTS or TT RS (8S Coupé or Roadster) with a sharp set of aftermarket wheels, spacers or coilovers? In this official guide from Wheels 'N Customs you'll find exact factory data, 18 to 20 inch aftermarket ranges, brake caliper clearance and lowering advice.

Why is accurate fitment essential on the Audi TT 8S?
\r\nThe Audi TT 8S sits on the well-known MQB platform and its sculpted wheel arches are very tight. Factory wheels have a relatively high offset (ET47 - ET52). A too-low ET pushes the wheels directly against the plastic arch liners when compressing, while on the TTS and especially the TT RS you must account for the large front brake calipers (brake clearance).

1. Original Factory Specifications (OEM Fits)

The OEM specifications below apply to the Audi TT, TTS and TT RS (8S Coupé & Roadster):

Specification Factory Value (OEM) Expert Note
PCD (Bolt Pattern) 5x112 Standard VAG 5-stud bolt pattern.
Centre Bore (CB) 57.1 mm Standard VAG centre bore; use centring rings when the hub bore is larger (> 57.1 mm).
OEM Wheel Sizes 17, 18, 19 and 20 Inch 17"-18" (TT Standard/S-Line), 19" (TTS / TT RS), 20" (Audi Sport optional).
OEM ET Range ET47 - ET52 8.5Jx18 ET50 / 9.0Jx19 ET52 / 9.0Jx20 ET52.
Wheel Fastening M14 x 1.5 Ball Conical (R13) Note: Aftermarket wheels almost always use 60° conical wheel bolts!
Tightening Torque 120 Nm Tighten to the specified torque with a calibrated torque wrench.

2. Aftermarket Fitment Guide (What fits safely?)

Want the wheel to sit more 'flush' in the arch without the tyre rubbing during sporty driving? See the recommended sizes:

Size Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
18 Inch 18x8.5J ET40 - ET45 245/40 R18 Excellent ride comfort, direct steering response, ideal for winter or track sets.
19 Inch 19x8.5J / 19x9.0J ET42 - ET45 245/35 R19 Golden Standard! Fits beautifully to the arch, rub-free when lowered.
20 Inch 20x9.0J ET42 - ET45 245/30 R20 or 255/30 R20 Exclusive stance & show look. Visually fills the TT's round wheel arches to the maximum.

3. Wheel Spacers, Bolt Pattern Adapters & Lowering Advice

The Audi TT 8S is ideal for a sporty lowered stance combined with the correct track width.

  • Wheel Spacers (Spacers): Are you running the original 19" or 20" Audi Sport wheels (ET52)? With a spacer set of 10 mm to 12 mm per side at the front and 12 mm to 15 mm per side at the rear you will align the wheels perfectly with the body. Use only hub-centric spacers (57.1 mm) and extended M14x1.5 wheel bolts!
  • Lowering (Magnetic Ride Compatible / Eibach / H&R / KW): Most TT S-Line and TTS models are equipped with Audi Magnetic Ride. When lowering with Eibach Pro-Kit or H&R lowering springs (25-30 mm) the adaptive suspension continues to function fully. Combined with a 19x8.5J ET42 to ET45 wheel setup the fitment remains 100% clearance-free.
  • Bolt Pattern Adapters: Want to fit wheels with a different bolt pattern (such as BMW's 5x120 or Japanese brands' 5x114.3)? This is possible using bespoke bolt pattern adapters of at least 15 mm thick. Remember that the effective ET value of the wheel decreases by the thickness of the adapter.

4. Frequently Asked Questions (FAQ)

Do 20 inch wheels rub on a lowered Audi TT 8S?
No, provided you choose the recommended sizing of 20x9.0J with an ET of ET42 to ET45 paired with 245/30 R20 or 255/30 R20 tyres. Even with a 30 mm drop using lowering springs this wheel and tyre combination remains completely free of rubbing in the wheel arches.
How do I know if an aftermarket wheel will clear the brakes of a TT RS?
The TT RS has solid 8-piston brake calipers at the front. Wheels with a very deep lip or spokes that curve strongly inwards often contact the side of the caliper. Choose wheels with a generous spoke profile and if in doubt check the brake clearance in advance with our fitment specialists.
Do I need to use conical wheel bolts with new aftermarket wheels?
Yes! Audi's original factory wheels use ball-conical (R13) bolts. Virtually all aftermarket wheel manufacturers (such as Concaver, JR-Wheels, Rotiform, Borbet, GMP) use a 60° conical bolt seat. Fitting the factory bolts to conical aftermarket wheels can cause damage or wheel loosening.

Have Your Fitment Checked By The Experts

Unsure about the correct ET, want to know if your dream wheels clear your TTS/TT RS brakes or looking for advice on a suitable lowering kit for your Audi TT? Contact the experts at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl