Wheel Fitment Guide - Audi TTRS Coupé & Roadster (8J 2.5 TFSI 340 hp / 360 hp Plus Quattro)

Wheels Fitment Guide - Audi TTRS Coupé & Roadster (8J 2.5 TFSI Quattro)

Model generation 8J MK2 (2009-2014) | 2.5 TFSI 5‑Cylinder CEPA/CEPB (340 hp / 360 hp Plus - 450 Nm) | Haldex Gen4 Quattro & Fixed Rear Wing

Wheels Fitment Guide Audi TTRS 8J Coupe Roadster Wheels 'N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi TTRS (8J / MK2)?
\r\nThe Audi TTRS (8J MK2 generation, produced between 2009 and 2014 with an original new price of approximately € 68.500,- to € 73.000,-) is an icon among German sports cars. Powered by the legendary 2.5-litre 5-cylinder TFSI turbo engine (340 HP / 450 Nm or 360 HP / 465 Nm on the TTRS Plus) with the iconic 1-2-4-5-3 firing order, mated to a 6-speed manual or S tronic and Haldex Gen4 Quattro four-wheel drive, the 8J TTRS is a brutish machine. The TTRS 8J uses the VAG bolt pattern 5x112 with a 57.1 mm centre bore and M14x1.5 wheel bolts. Factory-fit TTRS 8J wheels are 18 inch 5-double-spoke wheels (8.5J ET52 with 245/40 R18) or the famed 19 inch and 20 inch Rotor wheels (9.0J ET52 with 255/35 R19 & 9.0J ET52 with 255/30 R20 in Silver, Titanium or Black with red rim stripe). The most important technical fitment aspect are the factory-fitted black 4-piston RS brake calipers and 370 mm perforated discs at the front. When selecting aftermarket or trackday wheels (such as 19x8.5J or 19x9.0J with ET42 to ET52 from OZ Racing, BBS or Rotiform) you must check that the spokes have sufficient clearance from the brake calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Specification, Year and chassis number.

The image below shows the aggressive front end of the Audi TTRS 8J Coupé with a view of the aluminium RS details:

Audi TTRS 8J Coupé front in white

1. Factory specifications (OEM) Audi TTRS 8J

The values below represent the original factory parameters of the Audi TTRS Coupé & Roadster (8J MK2 2.5 TFSI). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 Standard VAG 5-bolt circle on the PQ35 RS platform.
Centre bore (CB) 57.1 mm Standard VAG PQ35 centre bore. Hub rings needed for wheels with a larger bore (e.g. 66.6 mm or 73.1 mm).
Wheel attachment type M14 x 1.5 Ball-cone Bolts 120 Nm torque recommended by Audi Sport GmbH.
OEM Wheel sizes (18" Standard 5-Spoke) 8.5J x 18 ET52 Factory 18 inch alloy wheels in square setup.
OEM Wheel sizes (19" / 20" Option Rotor / Plus) 9.0J x 19 ET52
\r\n 9.0J x 20 ET52
Factory 19 & 20 inch iconic Rotor alloy wheels in Titan, Anthracite or Black/Red.
OEM Tyre sizes 245/40 R18 (18") / 255/35 R19 (19") / 255/30 R20 (20") Supplied on Toyo Proxes T1 Sport, Pirelli P Zero or Michelin Pilot Sport 4S with XL load index.

2. Aftermarket Fitment Guide (19" & 20" TTRS 8J)

Do you want to equip your Audi TTRS 8J with a dedicated circuit/trackday wheelset, a wider stance or weight savings using Flow Formed / Forged wheels from brands such as OZ Racing (Ultraleggera / Superturismo LM / Formula HLT), BBS (CH-R / CI-R / FI-R in 5x112), Rotiform (LAS-R / RSE / BLQ), JR-Wheels (JR11 / JR21 / JR30 / SL01), Concaver, Motec (Ultralight), Autec (Wizard), Milltek, Armytrix, Wagner or Maxton styling? Below you will find the ideal sizes for a scratch-free fitment around the 370mm 4-piston RS brakes.

Wheel diameter & construction Position Recommended wheel width (J) Ideal ET value range Recommended tyre size
18 Inch (Lightweight Circuit / Trackday Sweet Spot) Front & Rear (Square) 8.5J / 9.0J ET42 - ET48 245/40 R18 (Semi-slicks Nankang AR-1 / Cup 2)
19 Inch (OEM+ Flush Fast Road Sweet Spot) Front & Rear (Square) 8.5J / 9.0J ET42 - ET48 245/35 R19 (or 255/35 R19)
20 Inch (OEM+ Flush Show & Performance Setup) Front & Rear (Square) 9.0J ET45 - ET50 255/30 R20

3. Spacers & Fitment Rules for TTRS 8J

Do you want to push the original 19" or 20" Rotor factory wheels with their high offset (9.0J ET52) slightly further out to make them sit flush with the wheel arches of the bodywork?

  • Spacers: On the original 9.0J ET52 factory wheels you can fit H&R or Eibach spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers matching the specific 5x112 bolt pattern and 57.1 mm hub bore with extended M14x1.5 wheel bolts.
  • 370mm RS Brake Caliper Clearance: Because the TTRS 8J has black 4-piston RS calipers and 370 mm drilled discs at the front, with aftermarket 18, 19 or 20 inch wheels you must check that the inner part of the wheel and the spokes clear the caliper. An ET value between ET42 and ET48 is ideal for aftermarket wheels.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Component / Operation Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Lip / Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Brand, Type, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Armytrix/Wagner exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and mounted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi TTRS Coupé or Roadster (8J 2.5 TFSI Quattro), would you like advice on 370mm RS caliper clearance, 19 or 20 inch Rotor / OZ Racing / BBS wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl