Model generations 8S Coupé & Roadster (2016-2023) | 2.5 TFSI 5-Cylinder Turbo (400 hp) | Quattro MQB Platform

Why is correct wheel fitment crucial for the Audi TTRS (8S)?
The Audi TTRS 8S is the ultimate expression of Audi Sport's award-winning 2.5 TFSI five-cylinder engine with 400 HP. Built on the MQB platform the TTRS uses the bolt pattern 5x112 with a 57.1 mm centre bore. Where regular TT models run relatively high ET values, the TTRS poses unique challenges due to its extremely large 370 mm (or 380 mm Ceramic) 8-piston RS brake calipers at the front. Wheels without sufficient 'Big Brake' spoke clearance or with too high an ET value will interfere with the calipers. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the Audi TTRS 8S Coupé and Roadster. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5-lug bolt circle on the MQB platform. |
| Centre bore (CB) | 57.1 mm | VAG MQB centre bore. Centre rings required for larger wheel hub holes (e.g. 66.5 mm or 73.1 mm). |
| Wheel fasteners type | M14 x 1.5 Ball-cone Bolts | Torque of 120 Nm recommended by Audi Sport. |
| OEM Wheel sizes (19" Standard) | 9.0J x 19 ET52 | Factory 5-arm rotor or 5-arm polygon RS wheels. |
| OEM Wheel sizes (20" Performance) | 9.0J x 20 ET52 | Factory 7-spoke rotor or Performance Parts forged wheels. |
| OEM Tyre sizes | 245/35 R19 / 255/30 R20 | Mandatory to be equipped with RO1 / RO2 (Audi Sport OEM) and XL Load Index. |
Do you want to give your Audi TTRS 8S a tighter fill of the wheel arches, a lightweight trackday setup or weight savings using Flow Formed / Forged wheels from brands such as Concaver, JR-Wheels (SL01 / JR11), Motec, Autec, Borbet, OZ Racing or Maxton-styling? Below you will find the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.
| Wheel diameter | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size | Fitment Characteristics |
|---|---|---|---|---|
| 19 Inch (OEM+ Comfort / Trackday Setup) | 8.5J / 9.0J | ET42 - ET45 | 245/35 R19 (or 255/35 R19) | Moves the wheel 7 to 10 mm further outwards. 100% scratch-free and retains comfort. |
| 19 Inch (Aggressive Flush Stance) | 9.0J / 9.5J | ET40 - ET42 | 255/35 R19 | The most popular size for trackdays and road use. Fills the arches flush. |
| 20 Inch (Absolute Sweet Spot Street Performance) | 9.0J | ET42 - ET45 | 255/30 R20 | Optimal balance between maximum visual fill and controlled suspension travel. |
| 20 Inch (Exclusive Wide Show Stance) | 9.5J | ET42 - ET45 | 255/30 R20 (or 265/30 R20 on coilovers) | Extremely wide visual presence. Requires precise camber adjustment. |
Do you want to push the original 19" or 20" RS wheels (9.0J ET52) slightly further outwards to make them sit flush with the fenders?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitment & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Splitter / Bumper Lip / Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitment | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitment (Vans / SUVs) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitment (Vans / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you can filter parts by Brand, Type, Version and Year of manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about exact fitment for your Audi TTRS (8S), would you like advice about 8‑piston RS caliper clearance or Quattro requirements, or would you like an all-in quote including workshop fitting in Nijkerk?