Looking for the perfect staggered setup for your BMW 3 Series Saloon (G20) or Touring (G21)? In this fitment guide from Wheels 'N Customs you'll find the exact wheel and tyre sizes to fill your arches perfectly without the risk of rubbing or xDrive issues.
Straight to the answer:
The BMW G20/G21 has a PCD of 5x112 and a centre bore of 66.6 mm. The most popular sporty 20 inch staggered setup is 20x8.5J ET25 front (225/35/20) combined with 20x9.5J ET38 rear (255/30/20). This guarantees a 100% xDrive-safe rolling circumference.
With the G20 generation, BMW switched to the CLAR platform. It is extremely important to know that older F30 wheels no longer fit.
| Specification | BMW G20 / G21 Sizing |
|---|---|
| PCD (bolt pattern) | 5x112 (Note: F30 was 5x120!) |
| Centre bore | 66.6 mm |
| Bolts (Thread size) | Bolt: M14 x 1.25 (Tightening torque 140 Nm) |
| Standard ET value (offset) | ET 25 (Front) / ET 40 (Rear on a staggered setup) |
Depending on the desired look and ride comfort, the specialists at Wheels 'N Customs recommend the proven staggered setups below.
| Fitment type | Wheel size Front / Rear | Ideal ET value | Tyre size Front / Rear |
|---|---|---|---|
| 19 Inch OEM+ Staggered | 19x8.5J / 19x9.5J | ET 25 (Front) / ET 38 (Rear) | 225/40/R19 / 255/35/R19 |
| 20 Inch Flush (Most popular) | 20x8.5J / 20x9.5J | ET 25 (Front) / ET 38 (Rear) | 225/35/R20 / 255/30/R20 |
| 20 Inch Aggressive (Wide stance) | 20x9.0J / 20x10.0J | ET 22 (Front) / ET 35 (Rear) | 245/30/R20 / 275/30/R20 |
No, unfortunately not directly. The F30 used a 5x120 PCD with a 72.6 mm centre bore. The G20 uses the newer 5x112 PCD with a 66.6 mm bore. This can only be solved with very thick PCD adapters, but that drastically changes the offset (ET).
Most aftermarket wheels (such as Veemann, Concaver or Concaver) are cast with a universal 72.6 mm centre bore. You then need hub-centric rings from 72.6 mm to 66.6 mm. These are included free of charge by Wheels 'N Customs with a wheel set.