Model generation F40 Hatchback (2019-2024) | 2.0 TwinPower Turbo B48 (306 hp) | FAAR-Platform xDrive All-wheel drive

Why is correct wheel fitment crucial for the BMW M135i xDrive (F40)?
The BMW M135i xDrive (F40) brings rapid 4WD hot-hatch performance to the premium segment thanks to the 306 HP B48 2.0-litre four-cylinder turbo engine and a mechanical Torsen limited-slip differential on the front axle. Built on the FAAR platform the M135i F40 uses the VAG/BMW 5x112 bolt pattern with a 66.6 mm centre bore (note: different from the older F20 generation which used 5x120). Factory-fit the M135i F40 comes in square setups of 18 inch (8.0J ET54) or 19 inch (8.0J ET54 on Styling 552M or 554M). When purchasing aftermarket alloys (such as 8.0J or 8.5J widths) a lower offset of ET42 to ET45 is the 'sweet spot' to achieve a flush fit, while ensuring sufficient spoke clearance around the 360 mm 4-piston M Sport brakes. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the BMW M135i xDrive (F40). Use these as technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | FAAR-platform bolt pattern (different from the F20/F21 5x120 bolt pattern). |
| Centre bore (CB) | 66.6 mm | Modern BMW centre bore standard. Centre rings required for larger wheel centre bores (e.g. 73.1 mm). |
| Type Wheel Fastening | M14 x 1.25 Bolts | Conical 60-degree seat. Tightening torque of 140 Nm. |
| OEM Wheel Sizes (18" Standard Styling 556M / 819M) | 8.0J x 18 ET54 | Factory M Double-spoke alloy wheels on Square setup. |
| OEM Wheel Sizes (19" Option Styling 552M / 554M) | 8.0J x 19 ET54 | Factory 19 inch M Double-spoke or M Performance forged black wheels. |
| OEM Tyre Sizes | 225/40 R18 (18") / 235/35 R19 (19") | Supplied on Continental SportContact 6 or Michelin Pilot Sport 4 with XL Load Index and Star-Mark (* BMW OEM). |
Do you want to give your BMW M135i F40 a tighter fill of the wheel arches, a sportier stance or weight savings with Flow Formed / Forged wheels from brands like Concaver, JR-Wheels (SL01 / JR11 / JR30), Rotiform, Veemann, Motec, Borbet, OZ Racing or Maxton-styling? Below you will find the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.
| Wheel Diameter & Construction | Position | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size |
|---|---|---|---|---|
| 18 Inch (OEM+ Winter / Trackday Setup) | Front & Rear (Square) | 8.0J / 8.5J | ET42 - ET45 | 225/40 R18 (or 235/40 R18) |
| 19 Inch (Absolute Street Performance Sweet Spot) | Front & Rear (Square) | 8.5J | ET42 - ET45 | 235/35 R19 |
| 19 Inch (Aggressive Flush Stance) | Front & Rear (Square) | 8.5J / 9.0J | ET38 - ET42 | 235/35 R19 (Light stretch on 9.0J) or 245/35 R19 |
| 20 Inch (Exclusive Show Stance) | Front & Rear (Square) | 8.5J | ET42 - ET45 | 235/30 R20 |
Do you want to push the original 18" or 19" M-wheels (8.0J ET54) slightly further out to make them flush with the fenders?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Lip / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer’s warranty and MOT assurance.
In our webshop you filter parts by Brand, Model, Version and Year of Manufacture (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Milltek/Eisenmann exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a trouble-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, bespoke drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Version, restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your BMW M135i xDrive (F40), would you like advice about 360mm M Sport brake clearance or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?