Model generation F87 Limited Coupé (2020) | 3.0 TwinPower Turbo S55 (450 hp / 550 Nm) | Carbon Roof & CCB Clearance

Why is correct wheel fitment crucial for the BMW M2 CS (F87)?
The BMW M2 CS (F87) is the ultimate, strictly limited evolution of the F87 line. Powered by the full‑power 450 HP S55 six‑cylinder twin‑turbo engine from the M4 Competition, the M2 CS combines a carbon bonnet and roof with a heavily revised chassis. The car uses the familiar BMW bolt pattern 5x120 with a 72.6 mm centre bore and M14x1.25 wheel bolts. Factory‑spec the M2 CS rides on lightweight forged 19 inch M Y‑spoke Styling 763M wheels in matte black or exclusive gold (9.0J ET29 front / 10.0J ET40 rear with Michelin Pilot Sport Cup 2 tyres). Because the M2 CS comes standard with massive red 400 mm M Sport brakes (or gold M Carbon Ceramic Brakes), spoke and barrel clearance is of primary importance when purchasing aftermarket or trackday wheels. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.
The values below represent the original factory parameters of the BMW M2 CS (F87). Use these as a technical reference when buying new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x120 | Classic BMW M 5‑lug bolt circle. |
| Centre bore (CB) | 72.6 mm | Standard BMW centre bore. Hubcentric rings required for larger wheel hub holes (e.g. 74.1 mm). |
| Wheel fastener type | M14 x 1.25 Bolts | Conical 60‑degree seat. Tightening torque 140 Nm. |
| OEM Wheel sizes (19" M Forged Styling 763M) | Front: 9.0J x 19 ET29 \r\n\t\t\tRear: 10.0J x 19 ET40 |
Factory M Performance lightweight forged wheels in Jet Black or Gold Matte. |
| OEM Tyre Sizes | Front: 245/35 ZR19 \r\n\t\t\tRear: 265/35 ZR19 |
Supplied on Michelin Pilot Sport Cup 2 (Connect) or Super Sport with XL Load Index and Star-Mark (* BMW OEM). |
Would you like to give your BMW M2 CS F87 an even wider, more concave stance or save weight with Flow Formed / Custom Forged wheels from brands like Apex (ARC-8 / EC-7 / VS-5RS), Concaver, JR-Wheels (SL01 / JR11), BC Forged, Rotiform, Veemann, Vossen, BBS (FI-R / RID) or Maxton-styling? Below you will find the ideal sizes for scratch-free fitment, also when lowered with Eibach, H&R or KW Clubsport coilovers.
| Wheel Diameter & Construction | Position | Recommended Rim Width (J) | Ideal ET Range | Recommended Tyre Size |
|---|---|---|---|---|
| 19 Inch (Apex Trackday / Circuit Sweet Spot) | Front \r\n\t\t\tRear |
9.5J 10.5J |
ET25 - ET28 \r\n\t\t\tET40 - ET44 |
255/35 R19 (or 265/30 R19 on coilovers) \r\n\t\t\t285/30 R19 (or 295/30 R19) |
| 19 Inch (Absolute Street Performance Sweet Spot) | Front \r\n\t\t\tRear |
9.0J / 9.5J 10.0J / 10.5J |
ET25 - ET29 \r\n\t\t\tET38 - ET42 |
245/35 R19 (or 255/35 R19) \r\n\t\t\t265/35 R19 (or 275/35 R19) |
| 20 Inch (Exclusive Show Stance Wide Set) | Front \r\n\t\t\tRear |
9.0J / 9.5J 10.0J / 10.5J |
ET25 - ET29 \r\n\t\t\tET38 - ET42 |
245/30 R20 (or 255/30 R20) \r\n\t\t\t275/30 R20 (or 285/30 R20) |
Would you like to push the original 19" 763M factory wheels (9.0J ET29 front / 10.0J ET40 rear) a little further out to make them sit flush with the arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily to 2 to 5 cars. We apply transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Fitment Time |
|---|---|---|
| Complete Wheel Set Fitment & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Lip / Bumper Lip / Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Fitment | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitment (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitment (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you filter parts by Brand, Model, Version and Year of manufacture (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Remus/Eisenmann exhaust systems and bodykits from Maxton Design carry official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Version restocking costs of 25% to 40% may apply for inspection and re-packaging.
Do you have specific questions about the exact fitment for your BMW M2 CS (F87), would you like advice on M Carbon Ceramic brake clearance or trackday Apex wheels, or would you like an all-in quote including workshop fitting in Nijkerk?