Wheel Fitment Guide - BMW M3 (E90 / E92 / E93 V8)

Wheels Fitment Guide - BMW M3 (E90 / E92 / E93 V8)

Model generations E90 Sedan, E92 Coupé & E93 Convertible (2007-2013) | 4.0 V8 S65 (420 hp) & 4.4 V8 GTS (450 hp) | M Widebody Rear-wheel drive

Wheels Fitment Guide BMW M3 E90 E92 V8 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the BMW M3 V8 (E90 / E92 / E93)?
The BMW M3 E92 Coupé, E90 Sedan and E93 Convertible are unique as the only M3 generation ever fitted with a high-revving 4.0-litre V8 naturally aspirated engine (S65B40, 420 HP up to 8,300 rpm). The E9x M3 has an aggressively flared M Widebody body with wide front guards and hips. The car uses the classic BMW bolt pattern 5x120 with a 72.6 mm hub bore and M12x1.5 wheel bolts. From the factory the M3 V8 sits on a sporty wheel set (8.5J ET29 front / 9.5J ET23 rear on 18 inch Styling 260M/270M or 19 inch Styling 220M / 359M Competition ZCP). For aftermarket wheels (such as 9.5J front and 10.5J rear) a very low offset (ET15–ET25) is essential to aggressively and flushly fill the wide M-arches while maintaining adequate spoke clearance around the 360 mm M-brakes. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Brand, Type, Variant, Year of manufacture and chassis number.

1. Factory specifications (OEM) BMW M3 V8 (E90 / E92 / E93)

The values below represent the original factory parameters of the BMW M3 V8 (E90 Sedan, E92 Coupé & E93 Convertible). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x120 Classic BMW M 5-bolt pitch circle diameter.
Hub Diameter (CB) 72.6 mm Standard BMW hub bore. Centre rings required for larger wheel hub holes (e.g. 74.1 mm).
Wheel Fastening Type M12 x 1.5 Bolts Conical 60-degree seat. Tightening torque 120 Nm.
OEM Wheel Sizes (18" Standard Styling 260M / 270M) Front: 8.5J x 18 ET29
Rear: 9.5J x 18 ET23
Factory M double-spoke alloy wheels on wide M offsets.
OEM Wheel Sizes (19" Standard Styling 220M) Front: 8.5J x 19 ET29
Rear: 9.5J x 19 ET23
Factory 19 inch M double-spoke polished wheels.
OEM Wheel Sizes (19" Competition ZCP / GTS Styling 359M) Front: 9.0J x 19 ET31
Rear: 10.0J x 19 ET25
Factory 19 inch CSL-style silver or matte-black forged wheels.
OEM Tyre Sizes Front: 245/40 R18 (245/35 R19 on 19")
Rear: 265/40 R18 (265/35 R19 on 19")
Supplied on Michelin Pilot Sport PS2 / Cup with XL Load Index.

2. Aftermarket Fitment Guide (18", 19" & 20")

Want to give your BMW M3 E90/E92/E93 an even wider, deep-concave stance or save weight with flow-formed / custom-forged wheels from brands like Apex (ARC-8 / EC-7 / VS-5RS), Concaver, JR-Wheels (SL01 / JR11), BC Forged, Rotiform, Veemann, Vossen, BBS (FI-R / CH-R) or Maxton-styling? Below are the ideal sizes for scratch-free fitment, also when lowering with Eibach, H&R or KW Clubsport coilovers.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
18 Inch (Apex Trackday / Circuit Sweet Spot) Front
Rear
9.5J / 10.0J
10.5J / 11.0J
ET20 - ET25
ET22 - ET25
265/35 R18
285/35 R18 (or 295/30 R18)
19 Inch (Absolute Street & Performance Sweet Spot) Front
Rear
9.0J / 9.5J
10.0J / 10.5J
ET20 - ET25
ET20 - ET25
245/35 R19 (or 255/35 R19)
275/35 R19 (or 285/30 R19)
20 Inch (Exclusive Deep Concave Show Stance) Front
Rear
9.0J / 9.5J
10.5J / 11.0J
ET18 - ET22
ET20 - ET25
245/30 R20 (or 255/30 R20)
285/30 R20 (or 295/25 R20)

3. Wheel Spacers & Bolt Pattern Adapters for BMW M3 E90 / E92 V8

Want to push the original 18" or 19" M3 wheels (8.5J ET29 front / 9.5J ET23 rear on Styling 220M / 260M) slightly further out to sit flush with the M arches?

  • Wheel Spacers: On original 220M or 359M factory wheels H&R or Eibach spacers of 12 mm to 15 mm front and 10 mm to 12 mm rear can be fitted. Use only hub-centric aluminium spacers with the specific 72.6 mm hub fitment and extended M12x1.5 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Eyeing an exclusive custom wheel set with a different bolt pattern (e.g. 5x120 to 5x112)? Adapters accommodate this but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the overall ET in advance to prevent wide rear tyres from rubbing the wheel arches during compression at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious, professional workshop in Nijkerk we mount wheels, exhausts, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Labour Mounting Rate (Excl. VAT) Indicative Mounting Time
Complete Wheel Set Mount & Balance € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vans / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vans / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tip (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT assurance.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Brand, Type, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or installed.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Eisenmann/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Type/Version restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your BMW M3 V8 (E90 / E92 / E93), would you like advice on 360mm M-brake caliper clearance or trackday Apex wheels, or would you like an all-in quotation including workshop installation in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl