Wheel Fitment Guide: BMW M3 F80 / M4 F82 F83 (2014-2020)

Wheels Fitment Guide: BMW M3 F80 / M4 F82 F83 (2014-2020)

The Ultimate Technical Wheel & Suspension Guide for BMW M3 F80 & M4 F82

Do you want to outfit your BMW M3 Sedan (F80) or M4 Coupé / Convertible (F82/F83) with a wide 'deep concave' fitment, wheel spacers or a height-adjustable coilover kit? In this official guide from Wheels 'N Customs you will find all factory specifications, 19 and 20 inch wide set combinations, M-Carbon Ceramic brake clearance and lowering advice.

Why is accurate fitment essential on the BMW M3 F80 / M4 F82?
The M3 F80 and M4 F82 are known for their extremely wide rear hips and aggressive wheel arches. From the factory the rear axle has a relatively low ET value (ET40 on 10.0J). If you choose too narrow aftermarket wheels with a too high ET (e.g. from a regular F30 3-series), the wheels will visually 'disappear' inside the arches. In addition, the optional gold M Carbon Ceramic Brakes (CCB) require sufficient internal diameter and spoke clearance.

1. Original Factory Specifications (OEM Fits)

The OEM specifications below apply to the BMW M3 F80, M4 F82 Coupé and M4 F83 Convertible (including LCI Facelift, Competition & CS):

Specification Factory Value (OEM) Expert Notes
Bolt Pattern (PCD) 5x120 Classic BMW M-GmbH 5-stud bolt pattern.
Centre Bore (CB) 72.6 mm Standard BMW centre bore; use hub centric rings for larger centre bores (> 72.6 mm).
OEM Wheel Sizes 18, 19 and 20 Inch (Staggered) 18" (OEM 513M), 19" (OEM 437M), 20" (OEM Competition 666M M-Star Spoke / CS 763M).
OEM ET Value Range ET29 (Front) / ET40 (Rear) Factory 9.0Jx19 ET29 front and 10.0Jx19 ET40 rear (19/20" staggered on CS).
Wheel Fastening M14 x 1.25 Conical (60°) BMW uses M14x1.25 conical wheel bolts on the F8x M-models.
Tightening Torque 140 Nm Tighten to the prescribed torque using a calibrated torque wrench.

2. Aftermarket Fitment Guide (What fits safely?)

Give your M3 or M4 an even more aggressive stance with proven 'deep concave' or lightweight motorsport wide sets:

Size Setup Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
19 Inch (Track / Circuit Wide Setup) Front: 19x9.5J
Rear: 19x10.5J / 19x11.0J
Front: ET20 - ET25
Rear: ET35 - ET40
Front: 265/35 R19
Rear: 295/30 R19 or 305/30 R19
Circuit Favourite! More tyre margin, lower rotating mass (Apex / Titan 7 / BC Forged).
20 Inch (Street / Flush Wide Setup) Front: 20x9.5J
Rear: 20x10.5J / 20x11.0J
Front: ET20 - ET22
Rear: ET35 - ET38
Front: 265/30 R20
Rear: 295/30 R20 or 305/25 R20
Golden Middle Ground for Shows! Beautiful deep concavity and rub-free fitment.
19" / 20" Staggered (CS Style) Front: 19x9.5J
Rear: 20x10.5J
Front: ET20 - ET22
Rear: ET35 - ET38
Front: 265/35 R19
Rear: 285/30 R20 or 295/30 R20
M4 CS / GTS Look! Optimal balance between sharp turn-in response and rear-axle traction.

3. Wheel Spacers, Bolt Pattern Adapters & Lowering Advice

The M3 F80 and M4 F82 already have a wide M track width, but with the right fitment tricks the hip vector really comes into its own.

  • Wheel Spacers (Spacers): Running the original M-Sport 19 inch 437M or 20 inch Competition 666M wheels (ET29 front / ET40 rear)? With a spacer set of 12 mm to 15 mm per side at the front and 10 mm to 12 mm per side at the rear the factory wheels sit exactly flush with the arch edges. Use only hub-centric spacers (72.6 mm) and extended M14x1.25 wheel bolts!
  • Lowering (Adaptive M Suspension / Eibach / H&R / KW HAS / KW V3): The M3/M4 often has the adaptive M suspension. When lowering with height-adjustable lowering springs (KW HAS / H&R VTF) or Eibach springs the electronic damper functionality (Comfort / Sport / Sport+) remains 100% intact. In combination with a 20x9.5J ET22 / 20x10.5J ET36 wide setup the fitment stays rub-free.
  • Bolt Pattern Adapters (5x120 to 5x112): Want to fit newer BMW G-Series M wheels (like the 825M/826M from the G80 M3 which have 5x112) to your F80/F82? With custom bolt pattern adapters from 5x120 to 5x112 (at least 15 mm thick) the bolt pattern can be converted. Note the recalculation of the ET value due to the adapter thickness!

4. Frequently Asked Questions (FAQ)

Do 20 inch wide setups with ET20 front and ET36 rear rub on a lowered M3 F80 / M4 F82?
No, provided you choose the recommended tyre sizes 265/30 R20 front and 295/30 R20 rear. The wide fender arches of the M3 F80 and M4 F82 offer plenty of clearance for 9.5J and 10.5J wide wheels with these low ET values, even with a drop of 25 mm to 35 mm.
Do 19 inch wheels fit over the optional M Carbon Ceramic Brakes (gold calipers)?
Not all 19 inch wheels fit over the M Carbon Ceramic Brakes (CCB) with 400 mm discs at the front. The inner diameter of the wheel barrel is very tight. Proven wheels such as the original BMW 437M, 763M, Apex VS-5RS, BC Forged and Volk Racing TE37 SL do fit rub-free.
Do I need to use conical wheel bolts with new aftermarket wheels?
Yes! Both factory and aftermarket wheels for the BMW M3 F80 / M4 F82 use 60° conical M14x1.25 wheel bolts. When fitting wheels with spacers ensure the thread engagement is extended exactly by the spacer thickness (e.g. 28 mm standard + 12 mm spacer = 40 mm thread length).

Have Your Fitment Checked By The Experts

Are you unsure about the correct ET value for your M3/M4 wide set, want to know if your dream wheels will fit over your Carbon Ceramic brakes or are you looking for advice on a suitable lowering kit for your BMW F80 or F82? Contact the experts at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl