Wheel Fitment Guide: BMW M3 G80 / M4 G82 | Wheels 'N Customs

The Ultimate Wheel Fitment Guide: BMW M3 G80 / M4 G82

The aggressive BMW M3 G80 (Saloon) and M4 G82 (Coupé) have massive wheel arches. In this guide from Wheels 'N Customs you’ll discover the ultimate 20/21 inch setups.

Straight to the answer (TL;DR):
The G80/G82 has a 5x112 bolt pattern with a 66.6 mm centre bore. The most popular custom upgrade is a 20/21 inch staggered set: 20x10.0J ET14 front (275/30/20) and 21x11.0J ET14 rear (295/25/21).

1. Original Factory Specifications (OEM)

Specification BMW M3 G80 / M4 G82 Sizing
Bolt pattern (PCD) 5x112
Hub diameter (Centre Bore) 66.6 mm
Mounting (Thread Size) Bolt: M14 x 1.25 (Tightening torque 140 Nm)
Factory Setup (19/20 Inch) Front: 19x9.5J ET20 (275/35/19) | Rear: 20x10.5J ET20 (285/30/20)

2. Aftermarket Fitment Options (20/21 Inch Stance)

Fitment Type Wheel size Front / Rear Ideal ET Value Tyre size Front / Rear
19/20 Inch Flush (Spacer look) 19x9.5J / 20x10.5J ET 12 (F) / ET 12 (R) 275/35/R19 / 285/30/R20
20/21 Inch Staggered (Ultimate) 20x10.0J / 21x11.0J ET 14 (F) / ET 14 (R) 275/30/R20 / 295/25/R21

3. What should you watch out for? (Expert Tips)

  • Inner arch rubbing at the front: On the G80 M3 there is a cooling duct at the front in the inner wheel arch. When steering with wide wheels/lowering, the tyre can lightly rub against it. Our wheel offsets prevent this.
  • KW HAS Lowering: The factory front ride height is very high. With a KW HAS spring kit you can lower continuously by 10–25 mm for a tight stance while retaining the M Modes.

4. Frequently Asked Questions (FAQ)

Can I fit spacers on the original wheels?

Yes! On original M wheels we very often fit 12 mm to 15 mm spacers all round for a clean 'flush' look. We supply these including extended black M14x1.25 wheel bolts.

Request a Fitment Check

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl