Wheel Fitment Guide - BMW M340i & M340d xDrive (G20 / G21)

Wheels Fitment Guide - BMW M340i & M340d xDrive (G20 / G21)

Model generations G20 Sedan & G21 Touring (2019-present) | 3.0 TwinPower Turbo B58 (374 hp) & 3.0 BiTurbo Diesel B57 (340 hp) | CLAR-Platform xDrive

Wheels Fitment Guide BMW M340i G20 G21 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the BMW M340i & M340d xDrive (G20 / G21)?
The BMW M340i and M340d xDrive (G20 Sedan / G21 Touring) represent the absolute peak of the regular 3-Series range. Powered by the renowned 374 HP B58 six-cylinder petrol engine or the torque-rich 340 HP B57 diesel engine, the G20/G21 M340i places specific demands on wheel installation. Built on the modern CLAR platform the M340i uses the bolt pattern 5x112 with a 66.6 mm centre bore (note: different from the older F30 generation with 5x120). Factory fitment places the M340i on a narrow staggered set (8.0J ET27 front / 8.5J ET40 rear) or the wider M Performance option (8.5J ET25 front / 9.5J ET35 rear on Styling 795M/898M). For aftermarket wheels, spoke clearance around the 348 mm or 374 mm 4-piston M Sport brakes is essential, as is a strict rolling circumference of < 1% to protect the xDrive transfer case. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.

1. Factory specifications (OEM) BMW M340i & M340d G20 / G21

The values below represent the original factory parameters of the BMW M340i & M340d xDrive (G20 Sedan & G21 Touring). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Explanation & Advice
Bolt pattern (PCD) 5x112 CLAR-platform bolt pattern (note: different from the F30\/F31 5x120 bolt pattern).
Centre bore (CB) 66.6 mm Modern BMW hub diameter. Centre rings required for larger wheel hub holes (e.g. 73.1 mm).
Wheel fastener type M14 x 1.25 Bolts Conical 60-degree seat. Torque specification 140 Nm.
OEM Wheel sizes (18" Standard Styling 790M) Front: 7.5J x 18 ET25
Rear: 8.5J x 18 ET40
Factory M Double-spoke two-tone alloy wheels.
OEM Wheel sizes (19" Option Styling 791M \/ 792M) Front: 8.0J x 19 ET27
Rear: 8.5J x 19 ET40
Factory 19 inch M Double-spoke in Jet Black or Cerium Grey wheels.
OEM Wheel sizes (20" M Performance Styling 795M) Front: 8.0J x 20 ET27
Rear: 8.5J x 20 ET40
Factory 20 inch M Performance forged wheels.
OEM Tyre sizes Front: 225\/40 R19 (225\/35 R20 on 20")
Rear: 255\/35 R19 (255\/30 R20 on 20")
Must be fitted with Star-Mark (* BMW OEM) and XL Load Index to protect xDrive.

2. Aftermarket Fitment Guide (19" & 20")

Do you want to give your BMW M340i or M340d G20\/G21 a wider, more concave stance or save weight with Flow Formed \/ Custom Forged wheels from brands like Concaver, JR-Wheels (SL01 \/ JR30), BC Forged, Rotiform, Veemann, Vossen, HRE or Maxton-styling? Below are the ideal sizes for a scratch-free fitment, even when lowered with Eibach, H&R or KW coilovers.

Wheel diameter & construction Position Recommended wheel width (J) Ideal ET value range Recommended tyre size
19 Inch (OEM+ Flush Performance Sweet Spot) Front
Rear
8.5J
9.5J
ET22 - ET25
ET35 - ET38
235\/40 R19 (or 245\/35 R19)
265\/35 R19 (or 275\/35 R19)
19 Inch (Aggressive Wide Track Setup) Front
Rear
9.0J
10.0J
ET22 - ET25
ET38 - ET40
245/35 R19
275/35 R19
20 Inch (Exclusive Show Performance Wide Set) Front
Rear
8.5J / 9.0J
9.5J / 10.0J
ET22 - ET25
ET35 - ET38
245\/30 R20
275\/30 R20 (or 285\/30 R20)

3. Hub-centric Spacers & Bolt Pattern Adapters for BMW M340i G20 \/ G21

Do you want to push the original 19" M wheels (8.0J ET27 front \/ 8.5J ET40 rear) slightly further out to make them sit flush with the arches?

  • Spacers: On the original 791M\/792M factory wheels H&R or Eibach spacers from 12 mm to 15 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub-centric aluminium spacers with the specific 66.6 mm hub fitment and extended M14x1.25 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Are you eyeing an exclusive custom wheel set with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt pattern adapters accommodate this, but require a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the final effective ET in advance to prevent wide rear tyres from contacting the wheel arches under compression at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we mount wheels, exhausts, bodykits and suspension on 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Labour rate (Excl. VAT) Indicative Labour time
Complete Wheel Set Mounting & Balancing € 75 - € 115 45 - 60 minutes
Front spoiler / Bumper lip / Splitter Mounting € 80 - € 120 45 - 60 minutes
Side Skirts Set Mounting € 103 - € 145 60 - 90 minutes
Rear diffuser Mounting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot-lid Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tip (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT-assurance.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Brand, Model, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Milltek/Remus/Eisenmann exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a trouble-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Variant re-stocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your BMW M340i or M340d xDrive (G20 / G21), would you like advice about M Sport / M Technology caliper clearance or xDrive rolling circumference requirements, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl