Wheel Fitment Guide: BMW X3 G01 / X4 G02 (2017-2024)
Key characteristics of BMW’s CLAR platform for SUVs:
When BMW moved from the older F25/F26 to the G01/G02 generation it adopted the 5x112 bolt pattern with a 66.6 mm centre bore. Old 5x120 wheels from the previous generation therefore do not fit without wheel adapters. In addition, the X3/X4 weighs roughly 1,800 to 2,000 kg, which places high demands on the **load rating (min. 750-850 kg per wheel)**.
1. Original Factory Specifications (OEM Fits)
The following OEM specifications apply to the BMW X3 G01 and X4 G02 (including xDrive20i/30i, 20d/30d, M40i & M40d):
| Specification |
Factory Value (OEM) |
Expert Notes |
| Bolt Pattern (PCD) |
5x112 |
Standard BMW CLAR platform bolt pattern. |
| Centre Bore (CB) |
66.6 mm |
Use centering rings for larger hub bores (> 66.6 mm). |
| OEM Wheel Sizes |
18, 19, 20 and 21 Inch |
18"-19" (xLine/Standard), 20" (M-Sport staggered set 699M), 21" (M Performance 718M). |
| OEM ET Range |
ET30 (Front) / ET43 (Rear) |
Factory 8.0Jx20 ET30 front and 9.5Jx20 ET43 rear on M-Sport variants. |
| Wheel Fastening |
M14 x 1.25 Conical (60°) |
Fastening using M14x1.25 conical wheel bolts. |
| Torque Setting |
140 Nm |
Tighten to the correct specified torque using a calibrated torque wrench. |
2. Aftermarket Fitment Guide (What fits safely?)
BMW SUV owners commonly choose a staggered setup for the X3/X4. Review the recommended aftermarket combinations:
| Size |
Wheel Width (J) |
Ideal ET Value |
Recommended Tyre Size |
Fitment Character |
| 19 Inch (Square Setup) |
19x8.5J (Front & Rear) |
ET28 - ET30 |
245/50 R19 |
Comfortable winter or daily setup, rotatable all around. |
| 20 Inch (Staggered M-Sport) |
Front: 20x8.5J
Rear: 20x9.5J / 20x10.0J |
Front: ET25 - ET28
Rear: ET38 - ET42 |
Front: 245/45 R20
Rear: 275/40 R20 |
Most popular fitment! Excellent balance between robust looks and ride comfort. |
| 21 Inch (Staggered Performance) |
Front: 21x8.5J / 21x9.0J \r\n\t\t\tRear: 21x9.5J / 21x10.0J |
Front: ET25 - ET28 \r\n\t\t\tRear: ET38 - ET42 |
Front: 245/40 R21 \r\n\t\t\tRear: 275/35 R21 |
Golden standard for the M40i/M40d! Fill the wide hips beautifully. |
3. Wheel Spacers, Bolt Pattern Adapters & Lowering Advice
The BMW X3 G01 and X4 G02 gain a significantly sportier SUV look and more direct handling with the correct track width and a lowering kit.
- Wheel Spacers (Spacers): Are you running the original M-Sport 20" or 21" staggered wheels (ET30 front / ET43 rear)? With a spacer set of 12 mm to 15 mm per side at the front and 15 mm per side at the rear, the factory wheels sit exactly flush with the body. Use only hub-centric spacers (66.6 mm) and extended M14x1.25 wheel bolts!
- Lowering (Eibach Pro-Kit / H&R / KW V3): A subtle drop of 25 mm to 35 mm significantly lowers the centre of gravity and reduces body roll in corners. Combined with a 20" or 21" staggered setup the fitment remains 100% rub-free.
- Fitting old F25/F26 wheels (5x120)? If you want to fit a set of 5x120 wheels from the previous-generation X3 onto a G01 (5x112), you'll need bolt pattern adapters from 5x112 to 5x120. Since these adapters are at least 18 to 20 mm thick, the wheel must have a high base specification (e.g. ET45+) to prevent the wheel from sticking out too far.
4. Frequently Asked Questions (FAQ)
Can you just fit any staggered set on a BMW X3/X4 with xDrive?
No! On xDrive models (four-wheel drive) the difference in rolling circumference between front and rear tyres may be a maximum of 1% (ideally as close to 0% as possible). Too large a circumference difference overloads the electronic transfer case and can cause costly damage. Always use tyre-size combinations approved by us such as 245/45 R20 front with 275/40 R20 rear.
Does the X3 M40i / M40d have special fitment requirements due to the M-Sport brakes?
Yes. The M40i and M40d are equipped with large M-Sport brake discs (348 mm or 395 mm) with 4-piston blue or red calipers on the front axle. Not all 18 inch or 19 inch wheels provide sufficient inner diameter and spoke clearance (brake clearance). With 20 inch or 21 inch wheels you are guaranteed sufficient caliper clearance.
Do I need to use conical wheel bolts with a set of aftermarket wheels?
Yes! Both OEM and aftermarket wheels for the BMW X3 G01 / X4 G02 use 60° conical M14x1.25 wheel bolts. When fitting wheels with spacers, ensure the thread length is extended exactly by the thickness of the spacer (e.g. 28 mm standard + 12 mm spacer = 40 mm thread length).
Have Your Fitment Checked By The Experts
Unsure about the correct ET for your X3/X4 staggered set, want to know which 20" or 21" set fits your M40i/M40d, or need advice on xDrive-compatible tyre sizes? Contact the fitment specialists at Wheels 'N Customs in Nijkerk directly.
Ask Our Experts For Advice