Wheel Fitment Guide - BMW X3 M40i & X3 M40d (G01 3.0 Turbo 354 hp / 360 hp xDrive)

Wheel Fitment Guide - BMW X3 M40i & X3 M40d (G01 3.0 Turbo)

Model generation G01 (2017-2024) | 3.0 B58 / B57 inline-6 Turbo (354 hp / 360 hp / 326 hp - 500 Nm / 680 Nm) | M Sport Differential, Adaptive M Chassis & xDrive Staggered

Wheels Fitment Guide BMW X3 M40i M40d G01 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the BMW X3 M40i & M40d (G01)?
The BMW X3 M40i and the torquey M40d (G01 generation, produced from 2017 to 2024 with an original new price of approximately € 66.500,- to € 69.900,-) are the epitome of sporty M Performance SAVs (Sports Activity Vehicles). Powered by the renowned 3.0-litre B58 six-cylinder turbo engine with 354 HP or 360 HP (and 500 Nm torque) or the M40d bi-turbo diesel with 326 HP and 680 Nm, paired with the Steptronic 8-speed automatic, M Sport differential and rear-axle-oriented xDrive four-wheel drive, the G01 M40i delivers unrivalled driving dynamics. The G01 uses the modern BMW bolt pattern 5x112 with a 66.6 mm hub bore and M14x1.25 wheel bolts. Crucial for the X3 M40i is the factory-mandated staggered (wide-set) setup. Factory-fitted the G01 M40i sits on 20 inch M Double-Spoke Style 699M wheels (8.0J ET27 front with 245/45 R20 & 9.5J ET43 rear with 275/40 R20) or optional 21 inch Style 718M wheels (8.5J ET30 front with 245/40 R21 & 9.5J ET43 rear with 275/35 R21 Bridgestone Alenza / Pirelli P Zero RFT tyres). To house the blue or red 4-piston M Sport brake calipers and 348 mm ventilated discs up front and to keep the xDrive rolling circumference exactly matched (maximum 1% difference between front and rear), precise wheel and tyre selection is required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) BMW X3 M40i / M40d G01

The values below represent the original factory parameters of the BMW X3 M40i & X3 M40d (G01 3.0 Turbo xDrive). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x112 Standard BMW CLAR-platform 5-lug bolt circle.
Hub diameter (CB) 66.6 mm Standard BMW G-series hub bore. Centre rings required for wheels with a larger hub diameter (e.g. 73.1 mm).
Wheel fastener type M14 x 1.25 Conical Bolts 140 Nm tightening torque recommended by BMW M GmbH.
OEM Wheel sizes (20" Staggered M Style 699M) 8.0J x 20 ET27 Front
9.5J x 20 ET43 Rear
Factory 20 inch M Sport alloy wide-set in xDrive configuration.
OEM Wheel sizes (21" Staggered M Style 718M / Cerium Grey) 8.5J x 21 ET30 Front
9.5J x 21 ET43 Rear
Factory 21 inch M Performance alloy wide-set on M40i / M40d trims.
OEM Tyre sizes 245/45 R20 Front & 275/40 R20 Rear (20")
245/40 R21 Front & 275/35 R21 Rear (21")
Supplied on Bridgestone Alenza 001, Pirelli P Zero * (BMW Star Marking) or Michelin Pilot Sport 4 SUV with XL load index.

2. Aftermarket Fitment Guide (20" & 21" BMW X3 M40i G01)

Want to give your BMW X3 M40i or M40d a wider stance, deeper concavity or weight savings using flow-formed / custom-forged wheels from brands such as BBS (CI-R / CC-R in 5x112 G-series fitment), AC Schnitzer (AC3 / AC1), Concaver (CVR1 / CVR3), JR-Wheels (JR21 / JR30 / SL01), OZ Racing (Superturismo Dakar / HyperGT HLT), Remus, Eisenmann, Akrapovi? or Maxton styling? Below you will find the ideal sizes for a scratch-free fitment around the 348mm M Sport brakes.

Wheel diameter & construction Position Recommended wheel width (J) Ideal ET value range Recommended tyre size
20 Inch (OEM+ Flush Street Performance Wide Set Sweet Spot) Front
Rear
8.5J Front
9.5J or 10.0J Rear
ET25 - ET30
ET38 - ET43
245\/45 R20 Front
275\/40 R20 Rear (Rolling circumference xDrive exactly 100% equal)
21 Inch (OEM+ Flush Fast Road Wide Set Sweet Spot) Front
Rear
8.5J or 9.0J Front
9.5J or 10.0J Rear
ET25 - ET30
ET38 - ET43
245\/40 R21 Front
275\/35 R21 (or 285\/35 R21) Rear
21 Inch (Aggressive Deep Concave / Wide Set) Front
Rear
9.0J Front
10.5J Rear
ET22 - ET28
ET35 - ET40
255\/40 R21 Front
295\/35 R21 Rear (Sporty wide SUV stance)

3. Wheel Spacers & Fitting Determinations for X3 M40i G01

Would you like to push the original 20" or 21" M factory wheels (8.0J\/8.5J ET27-ET30 / 9.5J ET43) a little further out to make them flush with the M wheel arch extensions?

  • Wheel Spacers (Spacers): On the original factory wheels H&R, Eibach or M-Performance spacers of 12 mm to 15 mm at the front and 15 mm to 20 mm at the rear can be fitted. Use only hub-centred aluminium spacers with the specific 5x112 bolt pattern and 66.6 mm hub bore, together with extended M14x1.25 wheel bolts.
  • 348mm M Sport Brake Clearance: The X3 M40i has 4-piston M Sport calipers and 348 mm ventilated discs at the front. When selecting aftermarket 20 or 21 inch alloy wheels, plenty of spoke clearance around the front calipers is required.

4. Fixed Workshop Labour Rates Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension to 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):

Component / Labour Fitting Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act merely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, factory warranty and MOT certainty.

How does the vehicle inspection and fitment guarantee of Wheels 'N Customs work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the inspection?

Yes. Almost all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Eisenmann/Akrapovi? exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT inspection in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order for online purchases within 14 days. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior checking of Brand/Type/Specification, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your BMW X3 M40i or X3 M40d (G01 3.0 Turbo 354 hp / 360 hp), would you like advice about 348mm M Sport brake caliper clearance, 20 or 21 inch BBS / Concaver / AC Schnitzer wide sets or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl