Model generations E85 Roadster & E86 Coupé (2006-2008) | 3.2 inline‑6 S54 Naturally Aspirated (343 hp) | E46 M3 CSL chassis technology

Why is correct wheel fitment crucial for the BMW Z4 M (E85 / E86)?
The BMW Z4 M (E85 Roadster and E86 Coupé) is one of the most sought‑after pure M models, powered by the high‑revving 343 HP S54 engine. The Z4 M’s suspension differs significantly from the regular Z4 models: the rear axle uses the wide E46 M3 CSL subframe. This means the Z4 M uses a low rear offset (ET30) on a 9.0J wheel, while the front requires a higher offset (ET42). Incorrect fitment negatively affects the characteristic steering response and can cause rubbing on the inner arches. At Wheels 'N Customs in Nijkerk we check every order in advance based on your chosen Make, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the BMW Z4 M Roadster and Coupé. Use these as a technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x120 | Classic BMW 5‑bolt bolt circle. |
| Centre bore (CB) | 72.6 mm | Standard BMW centre bore. Hubcentric rings required for larger wheel centre holes. |
| Wheel fastener type | M12 x 1.5 Bolts | Conical 60‑degree seat. Tightening torque 120 Nm. |
| OEM Wheel sizes (18" wheel set) | Front: 8.0J x 18 ET42 Rear: 9.0J x 18 ET30 |
Factory Styling 224M double‑spoke alloy. |
| OEM Tyre sizes | Front: 224/45 R18 (225/45 R18) Rear: 255/40 R18 |
Must be fitted with Star‑Mark (* BMW OEM) or XL load index. |
Do you want to give your Z4 M Coupé or Roadster the iconic CSL look or save weight with lightweight Flow Formed / Forged wheels from brands such as Apex (ARC-8 / EC-7), Concaver, JR-Wheels, CSL Styling 163M, Rotiform or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, also when lowered with KW V3, Eibach or H&R springs.
| Wheel Size & Construction | Position | Recommended Rim Width (J) | Ideal Offset Range | Recommended Tyre Size |
|---|---|---|---|---|
| 18 Inch (Sweet Spot Track / Street Setup) | Front Rear |
8.5J 9.5J / 10.0J |
ET35 - ET38 ET22 - ET25 |
225/45 R18 (or 235/40 R18) 255/40 R18 (or 265/35 R18) |
| 19 Inch (CSL Style Flush Wide Set) | Front Rear |
8.5J 9.5J / 10.0J |
ET35 - ET38 ET22 - ET27 |
235/35 R19 265/30 R19 (or 275/30 R19) |
| 19 Inch (Aggressive Deep Concave Track Look) | Front Rear |
9.0J 10.0J / 10.5J |
ET30 - ET35 ET20 - ET25 |
245/35 R19 275/30 R19 |
Do you want to push the original 18" Styling 224M wheels (8.0J ET42 front / 9.0J ET30 rear) further out to make them sit flush with the arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We use transparent fixed rates (excl. VAT):
| Component / Operation | Labour Rate (Excl. VAT) | Indicative Labour Time |
|---|---|---|
| Complete Wheel Set Fitting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Splitter / Bumper Lip / Splitter Fitting | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitting | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitting | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitting | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitting (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitting (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical knowledge. Wheels 'N Customs combines a webshop catalogue of over 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect parts ourselves daily, providing you with 100% fitment guarantee, factory warranty and MOT certainty.
In our webshop you can filter parts by Brand, Type, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists carry out a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Almost all our alloy wheels, lowering springs from Eibach/H&R/KW, Remus/Eisenmann/Milltek exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Variant restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your BMW Z4 M (E85/E86), would you like advice on CSL-style wheels or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?