Wheel Fitment Guide - Ford Fiesta ST & ST200 (MK7 / MK7.5 1.6 Turbo)

Wheels Fitment Guide - Ford Fiesta ST & ST200 (MK7 / MK7.5 1.6 Turbo)

Model generation MK7 / MK7.5 (2013-2017) | 1.6 EcoBoost 4-Cylinder Turbo (182 hp / 200 hp ST200 - 290 Nm) | B2E Performance Chassis

Wheels Fitment Guide Ford Fiesta ST MK7 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Ford Fiesta ST & ST200 (MK7)?
The Ford Fiesta ST MK7 and MK7.5 (including the ST180, ST3 and the rare limited ST200 in Storm Grey, with a new car value of around € 27,000,- to € 32,000,-) has been praised by motoring journalists as one of the best-handling hot hatches of the past decade. Powered by the characterful 1.6-litre EcoBoost 4-cylinder turbo engine (182 HP up to 200 HP with overboost), the MK7 ST offers playful handling. The car uses the traditional Ford 4-bolt bolt pattern 4x108 with a 63.4 mm hub bore and M12x1.5 wheel nuts. Factory-fitted, the MK7 ST comes on 17 inch 5-spoke wheels (7.0J ET47.5 with 205/40 R17 Bridgestone Potenza tyres, or matte-black 17 inch wheels on the ST200). When purchasing lightweight aftermarket wheels (such as 7.0J or 7.5J in 17 inch with ET38-ET42) the track is slightly widened. This gives an aggressive stance that pairs perfectly with Maxton Design front splitters, diffusers and ITG/Revo tuning upgrades. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Ford Fiesta ST MK7 / MK7.5

The values below represent the original factory parameters of the Ford Fiesta ST & ST200 (MK7 / MK7.5). Use these as technical reference when purchasing new wheels or track spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 4x108 Classic Ford 4-stud bolt pattern on the B2E platform.
Hub Diameter (CB) 63.4 mm Standard Ford hub bore. Centre rings required for wheels with a larger hub diameter (e.g. 73.1 mm).
Wheel Fastening Type M12 x 1.5 Conical Nuts Tightening torque of 135 Nm recommended by Ford Performance.
OEM Wheel Sizes (17" Standard ST \/ ST200) 7.0J x 17 ET47.5 Factory 17 inch 5-spoke wheels in Rado Grey, Silver or Matt Black (ST200).
OEM Tyre Sizes 205/40 R17 Supplied on Bridgestone Potenza RE050A or Michelin Pilot Sport 4 with XL Load Index.

2. Aftermarket Fitment Guide (17" & 18" Fiesta ST MK7)

Do you want to give your Ford Fiesta ST MK7 a wider track, a sportier stance or save weight with Flow Formed wheels from brands like Rota (Recce \/ Titan), Team Dynamics (Pro Race 1.2), JR-Wheels (JR11 \/ JR30 \/ SL01), Sparco (Assetto Gara \/ FF1), OZ Racing (Ultraleggera), Autec, Motec, Mountune or Maxton-styling? Below you will find the ideal sizes for scratch-free fitment, also when lowered with Eibach Pro-Kit, H&R or BC Racing coilovers.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
17 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 7.0J / 7.5J ET38 - ET42 205\/40 R17 (or 215\/40 R17)
17 Inch (Aggressive Trackday \/ Fast Road Setup) Front & Rear (Square) 7.5J / 8.0J ET35 - ET40 215\/40 R17 (Semi-slicks Nankang NS-2R \/ Cup 2)
18 Inch (Show & Stance Setup) Front & Rear (Square) 7.5J ET38 - ET42 215/35 R18

3. Spacers & Fitment Notes for Fiesta ST MK7

Do you want to push the original 17" ST factory wheels (7.0J ET47.5) slightly further out to make them sit flush with the arches?

  • Wheel Spacers: On the original 7.0J ET47.5 factory wheels, H&R, Eibach or Mountune spacers of 12 mm to 15 mm at the front and 15 mm to 20 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 4x108 bolt pattern and 63.4 mm hub fitment with extended M12x1.5 wheel studs.
  • Rolling Circumference & Tyre Choice: When fitting 215\/40 R17 tyres on a 7.5J wheel the Fiesta ST gains more mechanical grip when exiting sharp corners, without disturbing the wheel sensors of the ESP system.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspensions daily to 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part \/ Operation Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Fitment & Balancing € 75 - € 115 45 - 60 minutes
Front Splitter \/ Bumper Lip \/ Splitter Fitment € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitment € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitment € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension \/ Boot Spoiler Fitment € 55 - € 80 30 - 45 minutes
Sidebars Set Fitment (Commercial Vans \/ SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitment (Commercial Vans \/ Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back \/ Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you a 100% fit guarantee, manufacturer’s warranty and MOT certainty.

How does the vehicle inspection and fit guarantee from Wheels 'N Customs work?

In our webshop you filter parts by Brand, Model, Version and Year of Manufacture (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 or 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW/BC Racing, Milltek/Remus/Scorpion exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a trouble-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Model/Version restocking costs of 25% to 40% may apply for inspection and re-packaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Ford Fiesta ST or ST200 (MK7 / MK7.5 1.6 Turbo), would you like advice on 17 inch Rota / JR-Wheels wheels or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl